Effects of Nozzle Hole Number, Spray Included Angle and Compression Ratio on Combustion Characteristics in a Heavy-Duty Engine

被引：0

作者：

Choi, Minhoo ^{[1
]}

Park, Sungwook ^{[2
]}

机构：

[1] Hanyang Univ, Grad Sch, Dept Mech Convergence Engn, 222 Wangsimni Ro, Seoul 04736, South Korea

[2] Hanyang Univ, Sch Mech Engn, 222 Wangsimni Ro, Seoul 04736, South Korea

来源：

4TH THERMAL AND FLUIDS ENGINEERING CONFERENCE, ASTFE 2019 | 2019年

关键词：

Heavy-duty Engine; Nozzle hole Number; Spray Included Angle; Piston Chamber Geometry;

D O I：

暂无

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The purpose of this study is to analyze the effects of combustion on diesel spray included angle, nozzle hole number, and compression ratio. In order to investigate effects of each factor, the other factors except the comparison factor were kept constant under the same conditions. The results of the study were that as nozzle hole number increased, CO and Soot emissions and indicated specific fuel consumption were increased. In addition, the increase of included spray angle caused the spray could not evenly spread out to combustion chamber, CO and Soot emissions became increased. Finally, indicated specific fuel consumption was decreased that is because of compression ratio was increased.

引用

页数：4

共 50 条

[31] Investigation of Particle Number Emission Characteristics in a Heavy-Duty Compression Ignition Engine Fueled with Hydrotreated Vegetable Oil (HVO)
Shukla, Pravesh Chandra
Shamun, Sam
Gren, Louise
Malmborg, Vilhelm
Pagels, Joakim
Tuner, Martin
SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS, 2018, 11 (04) : 495 - 505
[32] Study of Pilot Injection for the Improvement of Combustion and Emissions Characteristics in a Heavy-Duty Diesel Engine
Chen, Liang
Zeng, Hong
Cheng, Xiaobei
MATERIAL SCIENCE, CIVIL ENGINEERING AND ARCHITECTURE SCIENCE, MECHANICAL ENGINEERING AND MANUFACTURING TECHNOLOGY II, 2014, 651-653 : 866 - +
[33] Experimental study of the combustion and emission characteristics of oxygenated fuels on a heavy-duty diesel engine
Han, Jinlin
Wang, Shuli
Vittori, Ruggero Maria
Somers, L. M. T.
FUEL, 2020, 268
[34] Effects of Nozzle Orifice Diameter and Hole Number on Diesel Combustion and Engine Performance
Seungwoo Kang
Sanguk Lee
Dongwoo Hong
Choongsik Bae
International Journal of Automotive Technology, 2022, 23 : 481 - 494
[35] Effects of Nozzle Orifice Diameter and Hole Number on Diesel Combustion and Engine Performance
Kang, Seungwoo
Lee, Sanguk
Hong, Dongwoo
Bae, Choongsik
INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 2022, 23 (02) : 481 - 494
[36] IMPACT OF GEOMETRIC COMPRESSION RATIO AND VARIABLE VALVE ACTUATION ON GASOLINE COMPRESSION IGNITION IN A HEAVY-DUTY DIESEL ENGINE
Zhang, Yu
Kumar, Praveen
Tang, Meng
Pei, Yuanjiang
Merritt, Brock
Traver, Michael
Popuri, Sriram
PROCEEDINGS OF THE ASME 2020 THE INTERNAL COMBUSTION ENGINE DIVISION FALL TECHNICAL CONFERENCE (ICEF2020), 2020,
[37] Effects of high cetane diesel on combustion, performance, and emissions of heavy-duty diesel engine
Saikia, Navarun
Sakunthalai, Ramadhas Arumugam
Chakradhar, Maya
Masilamani, Sithananthan
Maheshwari, Muhul
Saxena, Deepak
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, 2023, 30 (22) : 61246 - 61256
[38] Effects of altitude on combustion characteristic during cold start of heavy-duty diesel engine
Kan, Z. C.
Lou, D. M.
Cao, Z. Z.
Hu, Z. Y.
Liu, S.
Yang, Z. H.
INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 2017, 18 (02) : 209 - 217
[39] Effects of altitude on combustion characteristic during cold start of heavy-duty diesel engine
Z. C. Kan
D. M. Lou
Z. Z. Cao
Z. Y. Hu
S. Liu
Z. H. Yang
International Journal of Automotive Technology, 2017, 18 : 209 - 217
[40] Effects of high cetane diesel on combustion, performance, and emissions of heavy-duty diesel engine
Navarun Saikia
Ramadhas Arumugam Sakunthalai
Maya Chakradhar
Sithananthan Masilamani
Muhul Maheshwari
Deepak Saxena
Environmental Science and Pollution Research, 2023, 30 : 61246 - 61256

← 1 2 3 4 5 →