Thermal simulation of flexible LED package enhanced with copper pillars

被引：0
|
作者：
刘洋 [1 ,2 ,3 ]
梁润园 [2 ,3 ]
黄洁莹 [2 ,3 ]
袁长安 [2 ,4 ,3 ]
张国旗 [4 ,5 ]
孙凤莲 [1 ]
机构：
[1] School of Material Science and Engineering Harbin University of Science and Technology
[2] Beijing Research Centre Delft University of Technology
[3] State Key Laboratory of Solid State Lighting
[4] Institute of Semiconductors Chinese Academy of Sciences
[5] DIMES Center for SSL Technologies Delft University of
来源：
Journal of Semiconductors | 2015年 / 36卷 / 06期
关键词：
D O I：
暂无
中图分类号：
TN312.8 [];
学科分类号：
0803 ;
摘要：
Chip on flexible substrate(COF) is a new packaging technology for light emitting diodes(LED). This paper investigated the effect of Cu-pillar in the polyimide(PI) layer on the thermal properties of COF LED packages by finite element analysis. The thermal distribution and thermal resistance were studied in both COF LED packages with and without Cu-pillar. The PI layer showed the highest thermal resistance in the typical package and led to a high chip temperature. With the addition of Cu-pillars, however, the thermal resistance of the PI layer significantly decreased due to the improvement of vertical thermal dissipation under LED chips. Based on the results of simulation and calculation, the relationship between the amount of Cu-pillar and thermal resistance of the COF package has been built. For the packages studied in this research, an 8 8 Cu-pillars array was adequate to improve the thermal performance of COF packages.
引用
收藏
页码：89 / 92
页数：4
相关论文
共 50 条
  • [21] Combined Thermal and Hygro Effects on the Degradation of LED Package
    Ma, Xiaosong
    Zhang, G. Q.
    2013 14TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2013, : 389 - 392
  • [22] Research on Thermal Interface Materials for Power LED Package
    Liu, Wei
    Ma, Jun
    Lin, Qingping
    2020 21ST INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2020,
  • [23] Copper Electroless Bonding of Dome-Shaped Pillars for Chip-to-Package Interconnect
    Koo, Hyo-Chol
    Saha, Rajarshi
    Kohl, Paul A.
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2011, 158 (12) : D698 - D703
  • [24] Transient thermal analysis of high-power LED package
    Dai, Wei-Feng
    Wang, Jun
    Li, Yue-Sheng
    Bandaoti Guangdian/Semiconductor Optoelectronics, 2008, 29 (03): : 324 - 328
  • [25] Multi-LED package design,fabrication and thermal analysis
    R.H.Poelma
    S.Tarashioon
    H.W.van Zeijl
    S.Goldbach
    J.L.J.Zijl
    G.Q.Zhang
    Journal of Semiconductors, 2013, (05) : 54 - 58
  • [26] Optimization of the thermal distribution of multi-chip LED package
    Ben Abdelmlek, K.
    Araoud, Z.
    Charrada, K.
    Zissis, G.
    APPLIED THERMAL ENGINEERING, 2017, 126 : 653 - 660
  • [27] Thermal analysis of LED lamp with LTCC-CO package
    Lee, Chang Keun
    Ahn, Jung Keun
    Lee, Cheul Ro
    Kim, Daesuk
    Baek, Byung Joon
    MICROELECTRONICS INTERNATIONAL, 2013, 30 (01) : 3 - 9
  • [28] Thermal performance of high brightness LED array package on PCB
    Yung, K. C.
    Liem, H.
    Choy, H. S.
    Lun, W. K.
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2010, 37 (09) : 1266 - 1272
  • [29] Thermal characteristics for chip on metal package of LED lighting module
    Maeng, Seung-Ryol
    Ko, Seok-Cheol
    MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 2015, 38 : 357 - 361
  • [30] Thermal Performance of High Power LED Package Based on LTCC
    Ma, Mingsheng
    Liu, Zhifu
    Li, Yongxiang
    2011 12TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY AND HIGH DENSITY PACKAGING (ICEPT-HDP), 2011, : 441 - 444
12345