Thermal simulation of flexible LED package enhanced with copper pillars

被引:0
|
作者
刘洋 [1 ,2 ,3 ]
梁润园 [2 ,3 ]
黄洁莹 [2 ,3 ]
袁长安 [2 ,4 ,3 ]
张国旗 [4 ,5 ]
孙凤莲 [1 ]
机构
[1] School of Material Science and Engineering Harbin University of Science and Technology
[2] Beijing Research Centre Delft University of Technology
[3] State Key Laboratory of Solid State Lighting
[4] Institute of Semiconductors Chinese Academy of Sciences
[5] DIMES Center for SSL Technologies Delft University of
关键词
D O I
暂无
中图分类号
TN312.8 [];
学科分类号
0803 ;
摘要
Chip on flexible substrate(COF) is a new packaging technology for light emitting diodes(LED). This paper investigated the effect of Cu-pillar in the polyimide(PI) layer on the thermal properties of COF LED packages by finite element analysis. The thermal distribution and thermal resistance were studied in both COF LED packages with and without Cu-pillar. The PI layer showed the highest thermal resistance in the typical package and led to a high chip temperature. With the addition of Cu-pillars, however, the thermal resistance of the PI layer significantly decreased due to the improvement of vertical thermal dissipation under LED chips. Based on the results of simulation and calculation, the relationship between the amount of Cu-pillar and thermal resistance of the COF package has been built. For the packages studied in this research, an 8 8 Cu-pillars array was adequate to improve the thermal performance of COF packages.
引用
收藏
页码:89 / 92
页数:4
相关论文
共 50 条
  • [11] Validation of Thermal Effects of LED Package by Using Elmer Finite Element Simulation Method
    Leng, Lai Siang
    Retnasamy, Vithyacharan
    Shahimin, Mukhzeer Mohamad
    Saulii, Zaliman
    Taniselass, Steven
    Bin Ab Aziz, Muhamad Hafiz
    Vairavan, Rajendaran
    Kirtsaeng, Supap
    LIGHT-EMITTING DIODES: MATERIALS, DEVICES, AND APPLICATIONS FOR SOLID STATE LIGHTING XXI, 2017, 10124
  • [12] Thermal characterization of high power LED array in Aluminum Base Copper Clad Laminate package
    Hang, Chunjin
    Fei, Jingming
    Wang, Hong
    Wang, Chunqing
    2012 13TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY & HIGH DENSITY PACKAGING (ICEPT-HDP 2012), 2012, : 1425 - 1428
  • [13] The performance of compact thermal models for LED package
    Chen, Huanting
    Lu, Yijun
    Gao, Yulin
    Zhang, Haibing
    Chen, Zhong
    THERMOCHIMICA ACTA, 2009, 488 (1-2) : 33 - 38
  • [14] Thermal resistance measurement of LED package with multichips
    Kim, Lan
    Shin, Moo Whan
    IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2007, 30 (04): : 632 - 636
  • [15] Wearable and flexible thermoelectric generator with enhanced package
    Francioso, L.
    De Pascali, C.
    Taurino, A.
    Siciliano, P.
    De Risi, A.
    SMART SENSORS, ACTUATORS, AND MEMS VI, 2013, 8763
  • [16] Comparison of LED Package Reliability under Thermal Cycling and Thermal Shock Conditions by Experimental Testing and Finite Element Simulation
    Chen, Zhaohui
    Zhang, Qin
    Chen, Run
    Jiao, Feng
    Chen, Mingxiang
    Luo, Xiaobing
    Liu, Sheng
    2011 IEEE 61ST ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2011, : 454 - 459
  • [17] Junction temperature simulation of multichip module LED package
    Ahn, J.
    Kim, D.
    Lee, C. R.
    Baek, B. J.
    MATERIALS RESEARCH INNOVATIONS, 2014, 18 : 748 - 752
  • [18] Comparation of Thermal and Hygro Effects on the Degradation of LED Package
    Ma, Xiaosong
    Zhang, G. Q.
    2014 15TH INTERNATIONAL CONFERENCE ON THERMAL, MECHANICAL AND MULTI-PHYSICS SIMULATION AND EXPERIMENTS IN MICROELECTRONICS AND MICROSYSTEMS (EUROSIME), 2014,
  • [19] Bump thermal management analysis of LED with Flipchip package
    Min Sizong
    Li Junhui
    Duan Ji-an
    Deng Guiling
    ICEPT: 2006 7TH INTERNATIONAL CONFERENCE ON ELECTRONICS PACKAGING TECHNOLOGY, PROCEEDINGS, 2006, : 554 - +
  • [20] Thermal limit of enhanced EGA package
    Hwang, JG
    Chen, HN
    Lee, LW
    Lee, CC
    2000 INTERNATIONAL SYMPOSIUM ON MICROELECTRONICS, 2000, 4339 : 524 - 529