MICROSTRUCTURES AND MECHANICAL-PROPERTIES OF WELDED FE-12CR-20MN AUSTENITIC STAINLESS-STEEL

被引：1
|
作者：
ELDRIDGE, IJ
MORRISON, DJ
机构：
[1] Department of Mechanical and Aeronautical Engineering, Clarkson University, Potsdam, New York
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 1994年 / 3卷 / 05期
关键词：
AUSTENITIC STEELS; FATIGUE; FUSION ENERGY; TENSILE PROPERTIES; WELDING;
D O I：
10.1007/BF02645258
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effects of welding on the tensile and fatigue properties of fully annealed and cold-worked Fe-12Cr-20Mn austenitic stainless steel mere evaluated. Room temperature and 500 degrees C tensile tests and room temperature cantilever beam fatigue tests were accomplished on specimens that contained autogenous head-on-plate welds. The tensile and fatigue properties of the fully annealed material were not significantly influenced by welding. The tensile properties of the melded cold-worked material were also not significantly affected by the presence of a weldment. However, welding caused a large reduction of the fatigue life of the cold-worked material. Fatigue cracks preferentially initiated at large Mn-Si inclusions that formed in the fusion zones of the weldments.
引用
收藏
页码：606 / 611
页数：6
相关论文
共 50 条
  • [41] EVIDENCE FOR SUZUKI EFFECT IN AN FE-NI-CR AUSTENITIC STAINLESS-STEEL
    KANEKO, Y
    KANEKO, K
    NOHARA, A
    SAKA, H
    PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 1995, 71 (02): : 399 - 407
  • [42] TORQUING OF STAINLESS-STEEL AND NITINOL WIRES - A COMPARISON OF MECHANICAL-PROPERTIES
    BACHMANN, J
    EUROPEAN JOURNAL OF ORTHODONTICS, 1983, 5 (02) : 167 - 169
  • [43] THE OXIDATION OF FE-19.6CR-15.1MN STAINLESS-STEEL
    DOUGLASS, DL
    RIZZOASSUNCAO, F
    OXIDATION OF METALS, 1988, 29 (3-4): : 271 - 287
  • [44] INHOMOGENEITY OF MECHANICAL-PROPERTIES IN STAINLESS-STEEL RODS AFTER DRAWING
    SADOK, L
    LUKSZA, J
    MAJTA, J
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1994, 44 (1-2) : 129 - 141
  • [45] MECHANICAL-PROPERTIES OF CONTROLLED-POROSITY 316 STAINLESS-STEEL
    MOSSNER, WR
    JOURNAL OF METALS, 1979, 31 (03): : 17 - 20
  • [46] EFFECT OF DIRECT CASTING ON MECHANICAL-PROPERTIES OF STAINLESS-STEEL POSTS
    SORENSEN, JA
    CAPUTO, AA
    DAHER, T
    JOURNAL OF DENTAL RESEARCH, 1987, 66 : 343 - 343
  • [47] EFFECT OF THERMOMECHANICAL TREATMENT ON MECHANICAL-PROPERTIES OF DUPLEX STAINLESS-STEEL
    KAMEMURA, Y
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 (05): : S484 - S484
  • [48] Effect of Cold Deformation on Microstructures and Mechanical Properties of Austenitic Stainless Steel
    Xu, Deming
    Wan, Xiangliang
    Yu, Jianxin
    Xu, Guang
    Li, Guangqiang
    METALS, 2018, 8 (07):
  • [49] Microstructural Heterogeneity and Mechanical Properties of a Welded Joint of an Austenitic Stainless Steel
    Munoz, Jairo Alberto
    Dolgach, Egor
    Tartalini, Vanina
    Risso, Pablo
    Avalos, Martina
    Bolmaro, Raul
    Cabrera, Jose Maria
    METALS, 2023, 13 (02)
  • [50] PREPARATION AND MECHANICAL PROCESSING OF FE-12CR-6AL FERRITIC STAINLESS-STEEL
    SASTRY, SD
    ROHATGI, PK
    ABRAHAM, KP
    PRASAD, YVRK
    METALS TECHNOLOGY, 1980, 7 (OCT): : 393 - 396
12345