MICROSTRUCTURES AND MECHANICAL-PROPERTIES OF WELDED FE-12CR-20MN AUSTENITIC STAINLESS-STEEL

被引：1
|
作者：
ELDRIDGE, IJ
MORRISON, DJ
机构：
[1] Department of Mechanical and Aeronautical Engineering, Clarkson University, Potsdam, New York
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 1994年 / 3卷 / 05期
关键词：
AUSTENITIC STEELS; FATIGUE; FUSION ENERGY; TENSILE PROPERTIES; WELDING;
D O I：
10.1007/BF02645258
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effects of welding on the tensile and fatigue properties of fully annealed and cold-worked Fe-12Cr-20Mn austenitic stainless steel mere evaluated. Room temperature and 500 degrees C tensile tests and room temperature cantilever beam fatigue tests were accomplished on specimens that contained autogenous head-on-plate welds. The tensile and fatigue properties of the fully annealed material were not significantly influenced by welding. The tensile properties of the melded cold-worked material were also not significantly affected by the presence of a weldment. However, welding caused a large reduction of the fatigue life of the cold-worked material. Fatigue cracks preferentially initiated at large Mn-Si inclusions that formed in the fusion zones of the weldments.
引用
收藏
页码：606 / 611
页数：6
相关论文
共 50 条
  • [21] CREEP IN A 25CR-20NI AUSTENITIC STAINLESS-STEEL
    POLESNA, M
    PAHUTOVA, M
    CADEK, J
    RES MECHANICA, 1985, 15 (02): : 129 - 149
  • [22] Evaluation of microstructural and mechanical properties of Fe-16Cr-1Ni-9Mn-0.12N austenitic stainless steel welded joints
    Mukherjee, Manidipto
    Pal, Tapan Kumar
    MATERIALS CHARACTERIZATION, 2017, 131 : 406 - 424
  • [23] THE AIR OXIDATION OF AN AUSTENITIC FE-MN-CR STAINLESS-STEEL FOR FUSION-REACTOR APPLICATIONS
    DOUGLASS, DL
    GESMUNDO, F
    DEASMUNDIS, C
    OXIDATION OF METALS, 1986, 25 (3-4): : 235 - 268
  • [24] INFLUENCE OF ANNEALING TEMPERATURE ON THE MICROSTRUCTURE AND MECHANICAL-PROPERTIES OF A HIGH NITROGEN CONTAINING AUSTENITIC STAINLESS-STEEL
    HOLM, HC
    UGGOWITZER, PJ
    SPEIDEL, MO
    SCRIPTA METALLURGICA, 1987, 21 (04): : 513 - 518
  • [25] THE EFFECTS OF GRAIN AND SPECIMEN SIZES ON MECHANICAL-PROPERTIES OF TYPE-316 AUSTENITIC STAINLESS-STEEL
    MIYAHARA, K
    TADA, C
    UDA, T
    IGATA, N
    JOURNAL OF NUCLEAR MATERIALS, 1985, 133 (AUG) : 506 - 510
  • [26] SURFACE MECHANICAL-PROPERTIES OF AN EXPLOSIVE TREATED STAINLESS-STEEL
    PAILLE, L
    GERLAND, M
    VILLAIN, JP
    BADAWI, KF
    PRESLES, HN
    BOUCHET, B
    JOURNAL DE PHYSIQUE III, 1994, 4 (02): : 305 - 319
  • [27] MECHANICAL-PROPERTIES OF COPPER ALLOYED SINTERED STAINLESS-STEEL
    MOLINARI, A
    TESI, B
    TIZIANI, A
    FEDRIZZI, L
    STRAFFELINI, G
    1989 ADVANCES IN POWDER METALLURGY, VOLS 1-3, 1989, 1-3 : B297 - B309
  • [28] EFFECT OF CHALCOGENS AND BISMUTH ON MECHANICAL-PROPERTIES OF STAINLESS-STEEL
    BELOV, AD
    VILIM, YV
    KAZNACHEEVA, GV
    METAL SCIENCE AND HEAT TREATMENT, 1978, 20 (5-6) : 448 - 451
  • [29] MECHANICAL-PROPERTIES OF STAINLESS-STEEL CASTINGS AT CRYOGENIC TEMPERATURES
    OGATA, T
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1404 - 1404
  • [30] Cryorolling effect on microstructure and mechanical properties of Fe-25Cr-20Ni austenitic stainless steel
    Xiong, Yi
    He, Tiantian
    Wang, Junbei
    Lu, Yan
    Chen, Lufei
    Ren, Fengzhang
    Liu, Yuliang
    Volinsky, Alex A.
    MATERIALS & DESIGN, 2015, 88 : 398 - 405
12345