MICROSTRUCTURES AND MECHANICAL-PROPERTIES OF WELDED FE-12CR-20MN AUSTENITIC STAINLESS-STEEL

被引：1
|
作者：
ELDRIDGE, IJ
MORRISON, DJ
机构：
[1] Department of Mechanical and Aeronautical Engineering, Clarkson University, Potsdam, New York
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 1994年 / 3卷 / 05期
关键词：
AUSTENITIC STEELS; FATIGUE; FUSION ENERGY; TENSILE PROPERTIES; WELDING;
D O I：
10.1007/BF02645258
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effects of welding on the tensile and fatigue properties of fully annealed and cold-worked Fe-12Cr-20Mn austenitic stainless steel mere evaluated. Room temperature and 500 degrees C tensile tests and room temperature cantilever beam fatigue tests were accomplished on specimens that contained autogenous head-on-plate welds. The tensile and fatigue properties of the fully annealed material were not significantly influenced by welding. The tensile properties of the melded cold-worked material were also not significantly affected by the presence of a weldment. However, welding caused a large reduction of the fatigue life of the cold-worked material. Fatigue cracks preferentially initiated at large Mn-Si inclusions that formed in the fusion zones of the weldments.
引用
收藏
页码：606 / 611
页数：6
相关论文
共 50 条
  • [31] IRRADIATION EFFECTS ON MECHANICAL-PROPERTIES OF 18CR-11NI STAINLESS-STEEL
    VANDERSCHAAF, B
    DEVRIES, MI
    ATOMKERNENERGIE, 1977, 29 (02): : 91 - 93
  • [32] MECHANICAL-PROPERTIES OF STAINLESS-STEEL WELDED-JOINTS WITH VARIOUS FILLER WIRES IN THE CBL APPLICATION
    ITO, M
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 (05): : S502 - S502
  • [33] SOME MECHANICAL PROPERTIES OF AUSTENITIC STAINLESS-STEEL SINGLE CRYSTALS
    MEYRICK, G
    PAXTON, HW
    TRANSACTIONS OF THE METALLURGICAL SOCIETY OF AIME, 1964, 230 (05): : 1010 - &
  • [34] MECHANICAL-PROPERTIES OF HIGH-PURITY FE-26 CR-1 MO FERRITIC STAINLESS-STEEL
    FRANSON, IA
    METALLURGICAL TRANSACTIONS, 1974, 5 (11): : 2257 - 2264
  • [35] Weldability of 12%Cr-15%Mn austenitic stainless steel
    Abraham, Mehari
    Kutsuna, Muneharu
    Hosoi, Yuzo
    Transactions of the Japan Welding Society, 1992, 23 (02): : 33 - 37
  • [36] Microstructures and Mechanical Properties of Welded Joints Made of 603 High Strength Steel and High Nitrogen Austenitic Stainless Steel
    Yang D.
    Zhang J.
    Fan J.
    Zhou Z.
    Wang K.
    Binggong Xuebao/Acta Armamentarii, 2022, 43 (08): : 1990 - 1997
  • [37] STUDY ON 25-PERCENT-CR DUPLEX STAINLESS-STEEL .1. MECHANICAL-PROPERTIES OF 25-PERCENT-CR DUPLEX STAINLESS-STEEL WELDS
    MIURA, M
    KOSO, M
    MOROISHI, D
    MIYUKI, H
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1982, 22 (08) : B256 - B256
  • [38] INFLUENCE OF SLAG PARTICLES ON THE MECHANICAL-PROPERTIES AND CORROSION-RESISTANCE OF A P/M AUSTENITIC STAINLESS-STEEL
    ARNBERG, L
    KARLSSON, A
    BRANDRUPWOGNSEN, H
    INTERNATIONAL JOURNAL OF POWDER METALLURGY, 1988, 24 (03): : 215 - 223
  • [39] INTERPRETATION OF CREEP IN A 25CR-20NI AUSTENITIC STAINLESS-STEEL
    POLESNA, M
    PAHUTOVA, M
    CADEK, J
    KOVOVE MATERIALY-METALLIC MATERIALS, 1984, 22 (04): : 462 - 484
  • [40] MECHANICAL-PROPERTIES OF A HIGH-NITROGEN AUSTENITIC STAINLESS-STEEL PRODUCED BY PLASMA-ARC REMELTING
    CLAUER, AH
    FLETCHER, EE
    VANECHO, JA
    JOURNAL OF METALS, 1980, 32 (12): : 80 - 80
12345