PROCESS CAPABILITY STUDY OF A RAPID CASTING SOLUTION FOR ALUMINIUM ALLOYS USING THREE-DIMENSIONAL PRINTING

被引：10
|
作者：
Singh, R. [1 ]
机构：
[1] Guru Nanak Dev Engn Coll, Fac Prod Engn, Ludhiana 141006, Punjab, India
来源：
INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING | 2011年 / 4卷
关键词：
Three-dimensional printing; process capability; aluminium alloys; dimensional accuracy; rapid casting;
D O I：
10.15282/ijame.4.2011.2.0032
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In the present work, the best shell wall thickness of a mould cavity was investigated in a process capability study of a rapid casting solution for aluminium alloys using three-dimensional printing (3DP). Starting from the identification of a component/benchmark, an aluminium-alloy casting prototype was produced with different shell wall thicknesses by three dimensional printing. The results of the study suggest that, at the best shell wall thickness (5 mm) for aluminium alloys, the rapid casting solution using a 3DP process lies within the +/- 3.999 sigma (sigma) limit.
引用
收藏
页码：397 / 404
页数：8
相关论文
共 50 条
  • [41] Restoration of the cooling conditions in a three-dimensional continuous casting process using artificial intelligence algorithms
    Hetmaniok, Edyta
    Slota, Damian
    Zielonka, Adam
    APPLIED MATHEMATICAL MODELLING, 2015, 39 (16) : 4797 - 4807
  • [42] Three-Dimensional Macrosegregation Model of Bloom in Curved Continuous Casting Process
    Yadong Wang
    Lifeng Zhang
    Wei Chen
    Ying Ren
    Metallurgical and Materials Transactions B, 2021, 52 : 2796 - 2805
  • [43] Three-Dimensional Macrosegregation Model of Bloom in Curved Continuous Casting Process
    Wang, Yadong
    Zhang, Lifeng
    Chen, Wei
    Ren, Ying
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2021, 52 (04): : 2796 - 2805
  • [44] Three-dimensional simulation on the twin roll casting process of stainless strip
    Miao, Yuchuan
    Di, Hongshuang
    Zhang, Xiaoming
    Wang, Guodong
    Liu, Xianghua
    Jinshu Xuebao/Acta Metallurgica Sinica, 2000, 36 (10): : 1109 - 1112
  • [45] Reverse engineering the Greek comic mask using photographic three-dimensional scanning and three-dimensional printing
    Steele, KAM
    Williams, RG
    RAPID AND VIRTUAL PROTOTYPING AND APPLICATIONS, 2003, : 73 - 81
  • [46] Patient-Specific Augmentation Rhinoplasty Using a Three-Dimensional Simulation Program and Three-Dimensional Printing
    Choi, Yim Don
    Kim, Youngjun
    Park, EunSoo
    AESTHETIC SURGERY JOURNAL, 2017, 37 (09) : 988 - 998
  • [47] A study on development of the three-dimensional numerical model to analyze the casting process: Mold filling and solidification
    Mok, J
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2005, 19 (07) : 1488 - 1502
  • [48] Direct fabrication of micropatterns and three-dimensional structures using nanoreplication-printing (nRP) process
    Park, SH
    Lim, TW
    Yang, DY
    Yi, SW
    Kong, HJ
    SENSORS AND MATERIALS, 2005, 17 (02) : 65 - 75
  • [49] A study on the effects of resin infiltration techniques on parts produced using the three-dimensional printing (3DP) process
    Steele, KAM
    Herbert, NS
    Pretet, V
    RAPID DESIGN, PROTOTYPING, AND MANUFACTURING, 2004, : 71 - 78
  • [50] Practical applications of three-dimensional printing for process improvement in the cytopathology laboratory
    Monaco, Edward A.
    Reed, Toby
    Lynn, Terrance J.
    Rimini, Sarah A.
    Patel, Aalpen A.
    Monaco, Sara E.
    Patterson, Brian S.
    CANCER CYTOPATHOLOGY, 2024, 132 (02) : 75 - 83
12345