PROCESS CAPABILITY STUDY OF A RAPID CASTING SOLUTION FOR ALUMINIUM ALLOYS USING THREE-DIMENSIONAL PRINTING

被引：10
|
作者：
Singh, R. [1 ]
机构：
[1] Guru Nanak Dev Engn Coll, Fac Prod Engn, Ludhiana 141006, Punjab, India
来源：
INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING | 2011年 / 4卷
关键词：
Three-dimensional printing; process capability; aluminium alloys; dimensional accuracy; rapid casting;
D O I：
10.15282/ijame.4.2011.2.0032
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In the present work, the best shell wall thickness of a mould cavity was investigated in a process capability study of a rapid casting solution for aluminium alloys using three-dimensional printing (3DP). Starting from the identification of a component/benchmark, an aluminium-alloy casting prototype was produced with different shell wall thicknesses by three dimensional printing. The results of the study suggest that, at the best shell wall thickness (5 mm) for aluminium alloys, the rapid casting solution using a 3DP process lies within the +/- 3.999 sigma (sigma) limit.
引用
收藏
页码：397 / 404
页数：8
相关论文
共 50 条
  • [31] Three-Dimensional Printing of Large Ceramic Products and Process Simulation
    Lin, Tao
    Zhao, Zhihao
    Wang, Tao
    Pan, Ye-Tang
    MATERIALS, 2023, 16 (10)
  • [32] Reduced Three-Dimensional Model for Cold Rolling Simulation of Aluminium Alloys
    Pachnek, Florian
    Simon, Peter
    Zeman, Klaus
    NUMERICAL METHODS IN INDUSTRIAL FORMING PROCESSES, NUMIFORM 2023, 2024, : 11 - 24
  • [33] An investigation of the capability profile of the three dimensional printing process with an emphasis on the achievable accuracy
    Dimitrov, D
    van Wijck, W
    Schrevel, K
    de Beer, N
    Meijer, J
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2003, 52 (01): : 189 - 192
  • [34] Three-dimensional printing of ellipsoidal structures using Mercury
    Brown, Matthew L.
    Van Wieren, Ken
    Tailor, Hamel N.
    Hartling, David
    Jean, Anthony
    Merbouh, Nabyl
    CRYSTENGCOMM, 2018, 20 (03): : 271 - 274
  • [35] Study of SLA Printing Parameters Affecting the Dimensional Accuracy of the Pattern and Casting in Rapid Investment Casting
    Badanova, Nazym
    Perveen, Asma
    Talamona, Didier
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2022, 6 (05):
  • [36] Rapid fabrication of terahertz lens via three-dimensional printing technology
    Zhang, Zhongqi
    Wei, Xuli
    Liu, Changming
    Wang, Kejia
    Liu, Jinsong
    Yang, Zhengang
    CHINESE OPTICS LETTERS, 2015, 13 (02)
  • [37] Rapid fabrication of terahertz lens via three-dimensional printing technology
    张忠琪
    魏旭立
    刘昌明
    王可嘉
    刘劲松
    杨振刚
    ChineseOpticsLetters, 2015, 13 (02) : 78 - 81
  • [38] Feasibility of Calcium Sulfate Moulds Made by Inkjet 3D Printing for Rapid Casting of Aluminium Alloys
    Rodriguez-Gonzalez, Pablo
    Robles Valero, Pablo Eduardo
    Fernandez-Abia, Ana Isabel
    Castro-Sastre, Maria Angeles
    Barreiro Garcia, Joaquin
    METALS, 2020, 10 (06) : 1 - 17
  • [39] A puff model using a three-dimensional analytical solution for the pollutant diffusion process
    Silva, E. J. G.
    Tirabassi, T.
    Vilhena, M. T.
    Buske, D.
    ATMOSPHERIC RESEARCH, 2013, 134 : 131 - 136
  • [40] Freeform fabrication of tissue-simulating phantoms by combining three-dimensional printing and casting
    Shen, Shuwei
    Zhao, Zuhua
    Wang, Haili
    Han, Yilin
    Dong, Erbao
    Liu, Bin
    Liu, Wendong
    Cromeens, Barrett
    Adler, Brent
    Besner, Gail
    Ray, William
    Hoehne, Brad
    Xu, Ronald
    DESIGN AND QUALITY FOR BIOMEDICAL TECHNOLOGIES IX, 2016, 9700
12345