PROCESS CAPABILITY STUDY OF A RAPID CASTING SOLUTION FOR ALUMINIUM ALLOYS USING THREE-DIMENSIONAL PRINTING

被引：10

作者：

Singh, R. ^{[1
]}

机构：

[1] Guru Nanak Dev Engn Coll, Fac Prod Engn, Ludhiana 141006, Punjab, India

来源：

INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING | 2011年 / 4卷

关键词：

Three-dimensional printing; process capability; aluminium alloys; dimensional accuracy; rapid casting;

D O I：

10.15282/ijame.4.2011.2.0032

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In the present work, the best shell wall thickness of a mould cavity was investigated in a process capability study of a rapid casting solution for aluminium alloys using three-dimensional printing (3DP). Starting from the identification of a component/benchmark, an aluminium-alloy casting prototype was produced with different shell wall thicknesses by three dimensional printing. The results of the study suggest that, at the best shell wall thickness (5 mm) for aluminium alloys, the rapid casting solution using a 3DP process lies within the +/- 3.999 sigma (sigma) limit.

引用

页码：397 / 404

页数：8

共 50 条

[1] Process capability study of three dimensional printing as casting solution for non ferrous alloys
Kumar, Rajesh
Singh, Rupinder
Ahuja, I. P. S.
RAPID PROTOTYPING JOURNAL, 2016, 22 (03) : 474 - 486
[2] Investigations for a statistically controlled rapid casting solution of lead alloys using three-dimensional printing
Singh, J. P.
Singh, R.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2009, 223 (09) : 2125 - 2134
[3] Comparison of rapid casting solutions for lead and brass alloys using three-dimensional printing
Singh, R.
Singh, J. P.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2009, 223 (09) : 2117 - 2123
[4] Effect of Workpiece Volume on Statistically Controlled Rapid Casting Solution of Low Melting Alloys Using Three-Dimensional Printing
Singh, Rupinder
MATERIALS AND MANUFACTURING PROCESSES, 2012, 27 (04) : 377 - 382
[5] Effect of work piece volume on statistically controlled rapid casting solution of aluminum alloys using three dimensional printing
Singh, Rupinder
Singh, Rajinder
PROCEEDINGS OF THE 36TH INTERNATIONAL MATADOR CONFERENCE, 2010, : 377 - +
[6] Numerical solution of a three-dimensional solidification problem in aluminium casting
Bermúdez, A
Otero, MV
FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2004, 40 (13-14) : 1885 - 1906
[7] COMPARISON OF STATISTICALLY CONTROLLED RAPID CASTING SOLUTIONS OF ZINC ALLOYS USING THREE DIMENSIONAL PRINTING
Singh, R.
INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2011, 3 : 293 - 305
[8] Microscopic analysis on dimensional capability of fused filament fabrication three-dimensional printing process
Al Rashid, Ans
Qadir, Sikandar Abdul
Koc, Muammer
JOURNAL OF ELASTOMERS AND PLASTICS, 2022, 54 (02): : 385 - 403
[9] Efficacy of powder-based three-dimensional printing (3DP) technologies for rapid casting of light alloys
Gill, Simranpreet Singh
Kaplas, Munish
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 52 (1-4): : 53 - 64
[10] Efficacy of powder-based three-dimensional printing (3DP) technologies for rapid casting of light alloys
Simranpreet Singh Gill
Munish Kaplas
The International Journal of Advanced Manufacturing Technology, 2011, 52 : 53 - 64

← 1 2 3 4 5 →