THE LADDER PROBE - REVERSE FLOW MEASUREMENTS WITH A HOT-WIRE RAKE

被引:0
|
作者
SOKOLOV, M
GINAT, Z
机构
关键词
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
A probe consisting of a ladder-like rake of hot wires was developed in order to facilitate velocity measurements in reverse flow situations. Hot-wire signals obtained by the ladder probe capture a substantial section of the instantaneous velocity profile which includes the point where the change of direction occurs. These signals were processed to obtain the thickness of the reverse flow layer through a procedure which detects the point of zero velocity. The procedure was validated through a conservation-type consistency test, frequency response and periodicity tests, and by comparison with results in the literature. Characterization of a turbulent separated layer is discussed. Three different parameters are used to measure the thickness of the reverse flow region: cross streamwise coordinate of the point of zero average velocity, average coordinate of zero velocity points, and the coordinate of the 50% flow direction (forward or reversed) probability point. Relationships between these parameters and physical interpretation of their relevance to the separated flow field are also discussed.
引用
收藏
页码:307 / 318
页数:12
相关论文
共 50 条
  • [21] EXPERIMENTAL-STUDY OF A HOT-WIRE, SONIC NOZZLE PROBE FOR CONCENTRATION MEASUREMENTS
    MAROTEAUX, D
    MAROTEAUX, F
    MURAT, M
    REVIEW OF SCIENTIFIC INSTRUMENTS, 1991, 62 (04): : 1057 - 1062
  • [22] Investigation of wall effects on hot-wire measurements using a bent sublayer probe
    Natl Univ of Singapore, Singapore, Singapore
    Meas Sci Technol, 1 (67-85):
  • [23] An investigation of wall effects on hot-wire measurements using a bent sublayer probe
    Chew, YT
    Khoo, BC
    Li, GL
    MEASUREMENT SCIENCE AND TECHNOLOGY, 1998, 9 (01) : 67 - 85
  • [24] SELF-ALIGNING HOT-WIRE PROBE
    BOND, AD
    PORTER, AM
    JOURNAL OF THE ROYAL AERONAUTICAL SOCIETY, 1967, 71 (681): : 657 - &
  • [25] Dynamic response of a hot-wire anemometer. Part I: A marginally elevated hot-wire probe for near-wall velocity measurements
    Khoo, BC
    Chew, YT
    Lim, CP
    Teo, CJ
    MEASUREMENT SCIENCE AND TECHNOLOGY, 1998, 9 (05) : 751 - 763
  • [26] DIRECTIONAL MEAN FLOW MEASUREMENTS USING A SINGLE INCLINED HOT-WIRE
    MOUSSA, ZM
    ESKINAZI, S
    PHYSICS OF FLUIDS, 1975, 18 (03) : 298 - 305
  • [27] HOT-WIRE ANEMOMETRY IN TRANSONIC FLOW
    HORSTMAN, CC
    ROSE, WC
    AIAA JOURNAL, 1977, 15 (03) : 395 - 401
  • [28] APPLICATION OF A 3-SENSOR HOT-WIRE PROBE FOR INCOMPRESSIBLE-FLOW
    BUTLER, TL
    WAGNER, JW
    AIAA JOURNAL, 1983, 21 (05) : 726 - 732
  • [29] EXAMINATION OF THE FLOW AROUND A HOT-WIRE PROBE USING PARTICLE IMAGE VELOCIMETRY
    GRAHAM, LJW
    SORIA, J
    BREMHORST, K
    EXPERIMENTS IN FLUIDS, 1995, 19 (06) : 379 - 382
  • [30] Compressible flow hot-wire calibration
    R. Johnston
    S. Fleeter
    Experiments in Fluids, 1997, 22 : 444 - 446