ZERO-COMPLIANCE AEROSTATIC BEARING FOR AN ULTRA-PRECISION MACHINE

被引：5

作者：

MIZUMOTO, H

MATSUBARA, T

HATA, N

USUKI, M

机构：

[1] Faculty of Engineering, Tottori University, Tottori, 680, Koyama

[2] Nachi-Fujikoshi Co., Ltd, Toyama, 930

来源：

PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING | 1990年 / 12卷 / 02期

关键词：

aerostatic bearings; ulta-precision machine tools; zero compliance;

D O I：

10.1016/0141-6359(90)90030-3

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A new type of active air film restrictor is proposed for obtaining a zero-compliance aerostatic thrust bearing. The moving member in the active retrictor is sopported elastically. This active restrictor can therefore be called an aerostatically controlled-restrictor (ACR). Experiments show that the compliance of the thrust bearing with the ACR can be less than 1 nm N-1 when the frequency of the applied load is less than 2 Hz. Pneumatic hammer does nor occur during the experiments. © 1990.

引用

页码：75 / 80

页数：6

共 50 条

[1] Calculation and Analysis for Stiffness of the Thrust Aerostatic Bearing of Ultra-precision Machine Tools
Lu Lihua
Zhao Ziqiang
Liang Yingchun
Zhang Longjiang
[J]. 5TH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGIES: ADVANCED OPTICAL MANUFACTURING TECHNOLOGIES, 2010, 7655
[2] Modeling of dynamic characteristic of the aerostatic bearing spindle in an ultra-precision fly cutting machine
An, C. H.
Zhang, Y.
Xu, Q.
Zhang, F. H.
Zhang, J. F.
Zhang, L. J.
Wang, J. H.
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2010, 50 (04): : 374 - 385
[3] Design and experiments of ultra-precision aerostatic turning machine tool
Wu, Quanhui
Sun, Yazhou
Pan, Baisong
Gu, Dawei
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2022, 236 (23) : 11150 - 11159
[4] Development of ultra-precision centering and leveling turntable using aerostatic bearing technology
Hou Maosheng
Tian Yanrong
Ji Lin
Wang Longxiao
Liu Jiaqi
Zhao Weiqian
[J]. NINTH INTERNATIONAL SYMPOSIUM ON PRECISION ENGINEERING MEASUREMENTS AND INSTRUMENTATION, 2015, 9446
[5] Dynamic characteristics of ultra-precision aerostatic bearings
Chen, Xue-Dong
Zhu, Jin-Cheng
Chen, Han
[J]. ADVANCES IN MANUFACTURING, 2013, 1 (01) : 82 - 86
[6] Key Techniques of Ultra-Precision Aerostatic System
Li Dongsheng
Li Jiafu
Cui Ting
Hu Jiacheng
Cheng Yang
Wang Meibao
[J]. SIXTH INTERNATIONAL SYMPOSIUM ON PRECISION MECHANICAL MEASUREMENTS, 2013, 8916
[7] Dynamic characteristics of ultra-precision aerostatic bearings
Xue-Dong Chen
Jin-Cheng Zhu
Han ChenState
[J]. Advances in Manufacturing, 2013, 1 (01) : 82 - 86
[8] Dynamic characteristics of ultra-precision aerostatic bearings
Xue-Dong Chen
Jin-Cheng Zhu
Han Chen
[J]. Advances in Manufacturing, 2013, 1 : 82 - 86
[9] Investigation on the position drift of the axis averageline of the aerostatic bearing spindle in ultra-precision diamond turning
Huang, P.
Lee, W. B.
Chan, C. Y.
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2016, 108 : 44 - 51
[10] Modal analysis of an aerostatic spindle system for ultra-precision machine tools at different spin speeds
Chen, Peng
Zhuang, Hui
Chang, Yu
Ding, Jianguo
Zhong, Qidi
Yang, Hong
[J]. ADVANCES IN MECHANICAL ENGINEERING, 2018, 10 (09):

← 1 2 3 4 5 →