Effects of Cryogenic Forging and Anodization on the Mechanical Properties of AA 7075-T73 Aluminum Alloys

被引：0
|
作者：
Teng-Shih Shih
Tien-Wei Liao
Wen-Nong Hsu
机构：
[1] National Central University,Department of Mechanical Engineering
来源：
Journal of Materials Engineering and Performance | 2016年 / 25卷
关键词：
7075-T73; anodization; cryogenic forging; precipitates;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this study, high-strength AA7075 alloy samples were cryogenically forged after annealing and then subjected to solution and aging treatments. The cryogenically forged 7075-T73 alloy samples displayed equiaxed fine grains associated with abundant fine precipitates in their matrix. Compared with conventional 7075-T73 alloy samples, the cryogenically forged samples exhibited an 8-12% reduction in tensile strength and an increased fatigue strength and higher corrosion resistance. The fatigue strength measured at 107 cycles was 225 MPa in the bare samples; the strength was increased to 250 MPa in the cryogenically forged samples. The effect of anodization on the corrosion resistance of the bare samples was improved from (Ecorr) −0.80 to −0.61 V.
引用
收藏
页码：1211 / 1218
页数：7
相关论文
共 50 条
  • [21] An Experimental Investigation of Hot Forming Effects on Mechanical Properties of High-Strength Aluminum Alloys AA6082 and AA7075
    Scharifi, E.
    Kuhnhenn, D.
    Ademaj, A.
    Weidig, U.
    [J]. HOT SHEET METAL FORMING OF HIGH-PERFORMANCE STEEL: CHS2, 6TH INTERNATIONAL CONFERENCE, 2017, 2017, : 683 - 690
  • [22] Influence of friction stir welding parameters on metallurgical and mechanical properties of dissimilar AA5454-AA7075 aluminum alloys
    Abd Elnabi, Mohamed M.
    Elshalakany, Abou Bakr
    Abdel-Mottaleb, M. M.
    Osman, T. A.
    El Mokadem, A.
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2019, 8 (02): : 1684 - 1693
  • [23] Investigation of the Effects of Deformation Aging Applied to AA 7075 Aluminum Alloy on Mechanical and Metallographic Properties
    Yahya Taşgın
    Ramazan Ergin
    [J]. Journal of Materials Engineering and Performance, 2022, 31 : 4583 - 4603
  • [24] Investigation of the Effects of Deformation Aging Applied to AA 7075 Aluminum Alloy on Mechanical and Metallographic Properties
    Tasgin, Yahya
    Ergin, Ramazan
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (06) : 4583 - 4603
  • [25] Surface integrity in broaching of AA 7075-T651 aluminum alloys
    Sedighi, M.
    Nasrollahi, M.
    Joudaki, J.
    [J]. MACHINING SCIENCE AND TECHNOLOGY, 2019, 23 (01) : 79 - 94
  • [26] EFFECTS OF PRIOR ANNEALING ON THE MECHANICAL PROPERTIES OF A TWIST-EXTRUDED AA 7075 ALUMINUM ALLOY
    Sakthivel, Chandiran
    Kumar, Velkkudi Santhanam Senthil
    Iqbal, Usuff Mohammed
    [J]. MATERIALI IN TEHNOLOGIJE, 2020, 54 (01): : 17 - 23
  • [27] Mechanical and SCC properties of rheocast 7075 based aluminum alloys
    Osaki, Shuhei
    Horie, Shingo
    Kinoshita, Katsuyuki
    Sato, Satoru
    Adachi, Mitsuru
    Maeda, Takuma
    [J]. Keikinzoku/Journal of Japan Institute of Light Metals, 2005, 55 (01): : 27 - 32
  • [28] The effects of combined cyclic close die forging and aging process on microstructure and mechanical properties of AA7075
    Moazam, M. A.
    Honarpisheh, M.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2020, 234 (09) : 1242 - 1251
  • [29] Effect of Friction Stir Welding of Aluminum Alloys AA6061/AA7075: Temperature Measurement, Microstructure, and Mechanical Properties
    Godhani, Pratik S.
    Patel, Vivek V.
    Vora, Jay J.
    Chaudhary, Nishit D.
    Banka, Rishab
    [J]. INNOVATIONS IN INFRASTRUCTURE, 2019, 757 : 591 - 598
  • [30] Electrochemical behavior of anodized AA7075-T73 alloys as affected by the matrix structure
    Huang, Yung-Sen
    Shih, Teng-Shih
    Chou, Jun-Hung
    [J]. APPLIED SURFACE SCIENCE, 2013, 283 : 249 - 257
12345