Microstructural Characterization and Mechanical Properties of Friction-Welded IN718 and SS410 Dissimilar Joint

被引：15
|
作者：
Anitha P. [1 ]
Majumder M.C. [1 ]
Saravanan V. [2 ]
Rajakumar S. [3 ]
机构：
[1] Department of Mechanical Engineering, National Institute of Technology Durgapur, Durgapur, 713209, West Bengal
[2] Department of Engineering, Mechanical and Industrial Section, Higher College of Technology, Muscat
[3] Department of Manufacturing Engineering, Annamalai University, Annamalai Nagar, 608 002, Tamil Nadu
来源：
Metallography, Microstructure, and Analysis | 2018年 / 7卷 / 3期
关键词：
Friction welding; Hardness; IN718; Microstructure; SS410; Tensile strength;
D O I：
10.1007/s13632-018-0447-0
中图分类号：
学科分类号：
摘要：
Continuous drive friction welding studies on IN718 and SS410 dissimilar combination have been investigated. The influence of friction-welded parameters on microstructure and mechanical properties was dealt in detail. Six different joints were fabricated by varying rotational speed and friction pressure, by keeping forging pressure and friction time as constant. The microstructural study revealed the formation of different zones in the weld region of the dissimilar joint. Tensile and microhardness tests were conducted in order to examine the impact of process parameters of the joint and to define the ideal welding condition. The fractography images exposed the ductile fracture mode for all the samples. The friction-welded joint fabricated with the rotational speed of 1500 rpm and frictional pressure of 189 MPa yielded higher tensile strength and hardness. © 2018, Springer Science+Business Media, LLC, part of Springer Nature and ASM International.
引用
收藏
页码：277 / 287
页数：10
相关论文
共 50 条
  • [31] Effect of induction preheating on microstructure and mechanical properties of friction stir welded dissimilar material joints of Inconel 718 and SS316L
    Raj, Sanjay
    Biswas, Pankaj
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2023, 41 : 160 - 179
  • [32] Mechanical and microstructural properties of IN718 additively manufactured lattice structures
    Ferrarotti, A.
    Giuffrida, F.
    Sharghivand, E.
    Mussino, G.
    Vedani, M.
    Baricco, M.
    Castellero, A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2025, 919
  • [33] The effect of post weld heat treatment on mechanical properties of friction-welded Alloy 718 and SNCRW stainless steel
    Kim, Nam Yong
    Kim, Jeoung Han
    Kong, Yu Sik
    Yoon, Jong Won
    Yeom, Jong Taek
    Lee, Dong Guen
    Park, Nho Kwang
    ADVANCED MATERIALS AND PROCESSING, 2007, 26-28 : 511 - +
  • [34] A study on microstructural, mechanical properties and optimization of wear behavior of friction stir processed AlCrCoFeNi High Entropy Alloy reinforced SS410 using response surface methodology
    Ragunath, S.
    Radhika, N.
    Krishna, S. Aravind
    Rajeshkumar, L.
    HELIYON, 2024, 10 (02)
  • [35] Microstructural features of friction-welded Ti-6Al-4V joint
    Sun, DQ
    Ren, ZN
    Zhou, ZF
    North, T
    Zhai, Y
    Sathian, S
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2000, 16 (01) : 59 - 62
  • [36] Microstructural and mechanical properties of complex phase steel to aluminium alloy welded dissimilar joint
    Indhu, R.
    Tak, Manish
    Vijayaraghavan, L.
    Soundarapandian, S.
    48TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 48, 2020, 48 : 267 - 272
  • [37] Diffusion brazing of IN718/AISI 316L dissimilar joint: Microstructure evolution and mechanical properties
    Binesh, Behzad
    JOURNAL OF MANUFACTURING PROCESSES, 2020, 57 (57) : 196 - 208
  • [38] Microstructural features of friction-welded Ti-6Al-4V joint
    Sun, Daqian
    Ren, Zhenan
    Zhou, Zhenfeng
    North, T.
    Zhou, Yang
    Sathian, S.
    Journal of Materials Science and Technology, 2000, 16 (01): : 59 - 62
  • [39] Evaluation of the metallurgical and mechanical properties of friction-welded joints of dissimilar metal combinations AISI2205/Cu
    Tanju Teker
    The International Journal of Advanced Manufacturing Technology, 2013, 66 : 303 - 310
  • [40] Microstructural characterization and mechanical properties of micro friction stir welded dissimilar Al/Cu ultra-thin sheets
    Mao, Yue
    Ni, Yu
    Xiao, Xuan
    Qin, Dingqiang
    Fu, Li
    JOURNAL OF MANUFACTURING PROCESSES, 2020, 60 : 356 - 365
12345