Microstructural Characterization and Mechanical Properties of Friction-Welded IN718 and SS410 Dissimilar Joint

被引：15
|
作者：
Anitha P. [1 ]
Majumder M.C. [1 ]
Saravanan V. [2 ]
Rajakumar S. [3 ]
机构：
[1] Department of Mechanical Engineering, National Institute of Technology Durgapur, Durgapur, 713209, West Bengal
[2] Department of Engineering, Mechanical and Industrial Section, Higher College of Technology, Muscat
[3] Department of Manufacturing Engineering, Annamalai University, Annamalai Nagar, 608 002, Tamil Nadu
来源：
Metallography, Microstructure, and Analysis | 2018年 / 7卷 / 3期
关键词：
Friction welding; Hardness; IN718; Microstructure; SS410; Tensile strength;
D O I：
10.1007/s13632-018-0447-0
中图分类号：
学科分类号：
摘要：
Continuous drive friction welding studies on IN718 and SS410 dissimilar combination have been investigated. The influence of friction-welded parameters on microstructure and mechanical properties was dealt in detail. Six different joints were fabricated by varying rotational speed and friction pressure, by keeping forging pressure and friction time as constant. The microstructural study revealed the formation of different zones in the weld region of the dissimilar joint. Tensile and microhardness tests were conducted in order to examine the impact of process parameters of the joint and to define the ideal welding condition. The fractography images exposed the ductile fracture mode for all the samples. The friction-welded joint fabricated with the rotational speed of 1500 rpm and frictional pressure of 189 MPa yielded higher tensile strength and hardness. © 2018, Springer Science+Business Media, LLC, part of Springer Nature and ASM International.
引用
收藏
页码：277 / 287
页数：10
相关论文
共 50 条
  • [21] The microstructures, mechanical properties, and temperature distributions in nodular cast iron friction-welded joint
    Radosław Winiczenko
    Mieczysław Kaczorowski
    Andrzej Skibicki
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018, 40
  • [22] Enhancing microstructural, mechanical and tribological behaviour of AlSiBeTiV high entropy alloy reinforced SS410 through friction stir processing
    Ragunath, S.
    Radhika, N.
    Krishna, S. Aravind
    Jeyaprakash, N.
    TRIBOLOGY INTERNATIONAL, 2023, 188
  • [23] The microstructures, mechanical properties, and temperature distributions in nodular cast iron friction-welded joint
    Winiczenko, Radoslaw
    Kaczorowski, Mieczyslaw
    Skibicki, Andrzej
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2018, 40 (07)
  • [24] Improving microstructural and mechanical properties of dissimilar friction stir welded AZ61/AZ40 joint
    Wang, Liang
    Wang, Jixiang
    Cui, Chengwu
    Zhou, Peishan
    Wang, Bin
    Zheng, Hualin
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2024, 24 (02)
  • [25] Improving microstructural and mechanical properties of dissimilar friction stir welded AZ61/AZ40 joint
    Liang Wang
    Jixiang Wang
    Chengwu Cui
    Peishan Zhou
    Bin Wang
    Hualin Zheng
    Archives of Civil and Mechanical Engineering, 24
  • [26] Influence of Forging Pressure on Microstructural and Mechanical Properties Development in Linear Friction Welded Al-Cu Dissimilar Joint
    Zhou, Nan
    Gan, Chunlei
    Song, Dongfu
    Qi, Wenjun
    Attallah, Moataz M.
    SOLDAGEM & INSPECAO, 2019, 24
  • [27] Microstructural, Mechanical and Residual Stress Behaviour of Dissimilar Induction-Assisted Friction Stir Welded Inconel 718-AISI SS321 Joints
    Bhattacharjee, Rituraj
    Yadav, Prabhat Chand
    Medhi, Tanmoy
    Biswas, Pankaj
    METALS AND MATERIALS INTERNATIONAL, 2025,
  • [28] Microstructural characterization and wear analysis of AlTiVZrMoCr HEA coating on SS410 steel by atmospheric plasma spraying
    Srivatsav, V. Ram
    Radhika, N.
    Ragunath, S.
    Niketh, M.S.
    Basak, Animesh Kumar
    Journal of Alloys and Compounds, 2024, 1008
  • [29] Evaluation of the metallurgical and mechanical properties of friction-welded joints of dissimilar metal combinations AISI2205/Cu
    Teker, Tanju
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 66 (1-4): : 303 - 310
  • [30] Evaluation of the metallurgical and mechanical properties of friction-welded joints of dissimilar metal combinations AISI2205/Cu
    Teker, T. (tteker@hotmail.com), 1600, Springer London (66): : 1 - 4
12345