Microstructural Characterization and Mechanical Properties of Friction-Welded IN718 and SS410 Dissimilar Joint

被引：15
|
作者：
Anitha P. [1 ]
Majumder M.C. [1 ]
Saravanan V. [2 ]
Rajakumar S. [3 ]
机构：
[1] Department of Mechanical Engineering, National Institute of Technology Durgapur, Durgapur, 713209, West Bengal
[2] Department of Engineering, Mechanical and Industrial Section, Higher College of Technology, Muscat
[3] Department of Manufacturing Engineering, Annamalai University, Annamalai Nagar, 608 002, Tamil Nadu
来源：
Metallography, Microstructure, and Analysis | 2018年 / 7卷 / 3期
关键词：
Friction welding; Hardness; IN718; Microstructure; SS410; Tensile strength;
D O I：
10.1007/s13632-018-0447-0
中图分类号：
学科分类号：
摘要：
Continuous drive friction welding studies on IN718 and SS410 dissimilar combination have been investigated. The influence of friction-welded parameters on microstructure and mechanical properties was dealt in detail. Six different joints were fabricated by varying rotational speed and friction pressure, by keeping forging pressure and friction time as constant. The microstructural study revealed the formation of different zones in the weld region of the dissimilar joint. Tensile and microhardness tests were conducted in order to examine the impact of process parameters of the joint and to define the ideal welding condition. The fractography images exposed the ductile fracture mode for all the samples. The friction-welded joint fabricated with the rotational speed of 1500 rpm and frictional pressure of 189 MPa yielded higher tensile strength and hardness. © 2018, Springer Science+Business Media, LLC, part of Springer Nature and ASM International.
引用
收藏
页码：277 / 287
页数：10
相关论文
共 50 条
  • [1] Investigation on mechanical and metallurgical properties of rotary friction welded In718/SS410 dissimilar materials
    Anandaraj, J. Alex
    Rajakumar, S.
    Balasubramanian, V.
    Petley, Vijay
    MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 962 - 966
  • [2] Investigation on mechanical and metallurgical properties of rotary friction welded In718/SS410 dissimilar materials
    Center for Materials Joining and Research , Department of Manufacturing Engineering, Annamalai University, 608002, India
    不详
    560093, India
    Mater. Today Proc., 1600, (962-966):
  • [3] Creep-fatigue and thermo-mechanical fatigue of friction-welded IN718/MarM247 dissimilar joint
    Okazaki, Masakazu
    Sakaguchi, Motoki
    Tran, Tra Hung
    Sekihara, Masaru
    SUPERALLOYS 2008, 2008, : 221 - +
  • [4] Effect of Heat Treatment on the Microstructure and Mechanical Properties of Rotary Friction Welded Dissimilar IN718 to SS304L Alloys
    Pavan, Perumandla
    Talari, Mahesh Kumar
    Babu, Nagumothu Kishore
    Rehman, Ateekh Ur
    Srirangam, Prakash
    APPLIED SCIENCES-BASEL, 2023, 13 (06):
  • [5] Microstructural Analysis of Linear Friction-Welded 718 Plus Superalloy
    K. R. Vishwakarma
    O. A. Ojo
    P. Wanjara
    M. C. Chaturvedi
    JOM, 2014, 66 : 2525 - 2534
  • [6] Microstructural Analysis of Linear Friction-Welded 718 Plus Superalloy
    Vishwakarma, K. R.
    Ojo, O. A.
    Wanjara, P.
    Chaturvedi, M. C.
    JOM, 2014, 66 (12) : 2525 - 2534
  • [7] Microstructural characteristics and mechanical properties of rotary friction-welded dissimilar AISI 431 steel/AISI 1018 steel joints
    Thirumalaikkannan, Dhamothara Kannan
    Paramasivam, Sivaraj
    Visvalingam, Balasubramanian
    Sonar, Tushar
    Ivanov, Mikhail
    Murugaesan, Seeman
    JOURNAL OF THE MECHANICAL BEHAVIOR OF MATERIALS, 2023, 32 (01)
  • [8] Microstructural characterization and mechanical properties of friction-stir-welded dissimilar lap joint of CP-Ti and steel
    Gao, Y. F.
    Nakata, K.
    PROCEEDINGS OF THE 1ST INTERNATIONAL JOINT SYMPOSIUM ON JOINING AND WELDING, 2013, : 259 - 265
  • [9] Microstructure and Mechanical Properties of Friction-Welded and Post-Heat-Treated Inconel 718
    Yu-Sik Kong
    Muralimohan Cheepu
    Dong-Gyu Kim
    Transactions of the Indian Institute of Metals, 2020, 73 : 1449 - 1453
  • [10] Microstructure and Mechanical Properties of Friction-Welded and Post-Heat-Treated Inconel 718
    Kong, Yu-Sik
    Cheepu, Muralimohan
    Kim, Dong-Gyu
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2020, 73 (06) : 1449 - 1453
12345