Thermal Conductivity of Polymer Composite Material Based on Phenol-Formaldehyde Resin and Boron Nitride

被引：0
|
作者：
V. M. Samoilov
E. A. Danilov
I. M. Kaplan
M. V. Lebedeva
N. A. Yashtulov
机构：
[1] Research Institute of Graphite-Based Structural Materials “NIIgrafit”,
[2] Federal State Budgetary Educational Institution of Higher Education “MIREA – Russian Technological University”,undefined
来源：
Russian Physics Journal | 2022年 / 65卷
关键词：
heat sink materials; thermal conductivity; boron nitride; phenol-formaldehyde resin; polymer composite materials; thermal conductivity models;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The paper presents the results of studies of thermal conductivity, structure, and physico-chemical properties of samples of polymer composite material based on thermosetting phenol-formaldehyde resin and hexagonal boron nitride. It was found that with an increase in the volume fraction of boron nitride from 5 to 85%, the effective thermal conductivity coefficient at 300 K increased from 0.63 to 18.5 W/m·K. Experimental results were compared with the data calculated using known theoretical models used to describe the process of thermal conductivity in polymer composite materials.
引用
收藏
页码：80 / 90
页数：10
相关论文
共 50 条
  • [41] Thermal stability of boron-containing phenol formaldehyde resin
    Gao, JG
    Liu, YF
    Yang, LT
    POLYMER DEGRADATION AND STABILITY, 1999, 63 (01) : 19 - 22
  • [42] DIELECTRIC INVESTIGATIONS ON NOVOLAC PHENOL-FORMALDEHYDE RESIN
    HOLLAND, C
    STARK, W
    HINRICHSEN, G
    ACTA POLYMERICA, 1995, 46 (01) : 64 - 67
  • [43] Brominated phenol-formaldehyde resin as an adhesive for plywood
    Petsom, A. (amorn.p@chula.ac.th), 1918, John Wiley and Sons Inc. (89):
  • [44] Phenol-formaldehyde resin emulsions as wood adhesives
    Broline, BM
    Adams, RA
    Schmidt, RG
    36th International Wood Composite Materials Symposium, Proceedings, 2002, : 23 - 29
  • [45] Use of the branching theory in approximation of viscosity of the thermoset: Phenol-formaldehyde resin and boron oxide
    Kazakh Acad of Sciences, Almaty, Kazakhstan
    J Appl Polym Sci, 2 (319-328):
  • [46] Research on the micro-structural evolution of phenol-formaldehyde resin modified by boron carbide
    Wang, JG
    Jiang, HY
    PROCEEDINGS OF 2005 INTERNATIONAL CONFERENCE ON ADVANCED FIBERS AND POLYMER MATERIALS (ICAFPM 2005), VOL 1 AND 2: NEW CENTURY , NEW MATERIALS AND NEW LIFE, 2005, : 457 - 460
  • [47] Use of the branching theory in approximation of viscosity of the thermoset: Phenol-formaldehyde resin and boron oxide
    Mamleev, VS
    Gibov, KM
    JOURNAL OF APPLIED POLYMER SCIENCE, 1997, 66 (02) : 319 - 328
  • [48] Densely Packed Polymer/Boron Nitride Composite for Superior Anisotropic Thermal Conductivity
    Zhu, Zhijia
    Wang, Pengxiang
    Lv, Peng
    Xu, Tianhao
    Zheng, Jiajin
    Ma, Chen
    Yu, Kehan
    Feng, Wei
    Wei, Wei
    Chen, Liangyao
    POLYMER COMPOSITES, 2018, 39 : E1653 - E1658
  • [49] INFLUENCE OF PH OF PHENOL-FORMALDEHYDE RESIN AND THERMAL-TREATMENT ON THE PROPERTIES OF HARDBOARD
    FADL, NA
    RAKHA, M
    HOLZ ALS ROH-UND WERKSTOFF, 1984, 42 (02) : 59 - 62
  • [50] Structure and thermal resistance of phosphoric acid-modified phenol-formaldehyde resin
    Feng, L.-B. (fenglb@mail.lzjtu.cn), 1600, Beijing Institute of Aeronautical Materials (BIAM)
12345