Thermal Conductivity of Polymer Composite Material Based on Phenol-Formaldehyde Resin and Boron Nitride

被引：0
|
作者：
V. M. Samoilov
E. A. Danilov
I. M. Kaplan
M. V. Lebedeva
N. A. Yashtulov
机构：
[1] Research Institute of Graphite-Based Structural Materials “NIIgrafit”,
[2] Federal State Budgetary Educational Institution of Higher Education “MIREA – Russian Technological University”,undefined
来源：
Russian Physics Journal | 2022年 / 65卷
关键词：
heat sink materials; thermal conductivity; boron nitride; phenol-formaldehyde resin; polymer composite materials; thermal conductivity models;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The paper presents the results of studies of thermal conductivity, structure, and physico-chemical properties of samples of polymer composite material based on thermosetting phenol-formaldehyde resin and hexagonal boron nitride. It was found that with an increase in the volume fraction of boron nitride from 5 to 85%, the effective thermal conductivity coefficient at 300 K increased from 0.63 to 18.5 W/m·K. Experimental results were compared with the data calculated using known theoretical models used to describe the process of thermal conductivity in polymer composite materials.
引用
收藏
页码：80 / 90
页数：10
相关论文
共 50 条
  • [21] The Preparation and Wear Behaviors of Phenol-Formaldehyde Resin/BN Composite Coatings
    Zang, Chao
    Xing, Yaping
    Yang, Tingting
    Teng, Qi
    Zhen, Jinming
    Zhang, Ran
    Jia, Zhengfeng
    Han, Weifang
    POLYMERS, 2022, 14 (19)
  • [22] STUDY ON THE MECHANISM OF SYNTHESIS AND CURING OF BORON-CONTAINING PHENOL-FORMALDEHYDE RESIN
    GAO, JG
    ACTA CHIMICA SINICA, 1990, 48 (04) : 411 - 414
  • [23] Thermal degradation and stability of accelerated-curing phenol-formaldehyde resin
    Fan, D. (fandongbin8@163.com), 1600, North Carolina State University (09):
  • [24] Effect of synthesis parameters on thermal behavior of phenol-formaldehyde resol resin
    Park, BD
    Riedl, B
    Kim, YS
    So, WT
    JOURNAL OF APPLIED POLYMER SCIENCE, 2002, 83 (07) : 1415 - 1424
  • [25] Thermal Degradation and Stability of Accelerated-curing Phenol-formaldehyde Resin
    Chen, Yuzhu
    Fan, Dongbin
    Qin, Tefu
    Chu, Fuxiang
    BIORESOURCES, 2014, 9 (03): : 4063 - 4075
  • [26] SOME ASPECTS OF THE THERMAL ANNEALING PROCESS IN A PHENOL-FORMALDEHYDE RESIN CHAR
    SUUBERG, EM
    WOJTOWICZ, M
    CALO, JM
    CARBON, 1989, 27 (03) : 431 - 440
  • [27] Synthesis and characterization of microencapsulated phase change material with phenol-formaldehyde resin shell for thermal energy storage
    Liu, Chenzhen
    Cao, Huanxin
    Jin, Shaocai
    Cheng, Qingjiang
    Rao, Zhonghao
    SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2022, 243
  • [28] Thermal Characterization of Kraft Lignin Phenol-Formaldehyde Resin for Paper Impregnation
    Mahendran, Arunjunaj Raj
    Wuzella, Guenter
    Kandelbauer, Andreas
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2010, 24 (8-10) : 1553 - 1565
  • [29] Effect of Boron Nitride Particle Geometry on the Thermal Conductivity of a Boron Nitride Enhanced Polymer Composite Film
    Liu, Ya
    Nanwang
    Ye, Lilei
    Lu, Hongbin
    Liu, Johan
    2019 25TH INTERNATIONAL WORKSHOP ON THERMAL INVESTIGATIONS OF ICS AND SYSTEMS (THERMINIC 2019), 2019,
  • [30] Modification of nylon 6 by a phenol-formaldehyde resin
    Huang, Misty W., 1600, (48):
12345