On the Issue of Determining the Number of Cutting Abrasive Grains on the Working Surface of a Grinding Wheel

被引：0
|
作者：
Fedotov V.V. [1 ]
Osipov A.P. [1 ]
Kiselev E.S. [2 ]
机构：
[1] Syzran Branch of Samara State Technical University, Syzran
[2] Ulyanovsk State Technical University, Ulyanovsk
来源：
Russian Engineering Research | 2023年 / 43卷 / 02期
关键词：
binder; cutting abrasive grains; experimental sample; experimental technique; grinding wheel; penetration depth;
D O I：
10.3103/S1068798X23030097
中图分类号：
学科分类号：
摘要：
Abstract: The work discusses the method of experimental determination of the number of cutting abrasive grains on the working surface of a grinding wheel. We experimentally evaluate the value of the fraction of cutting grains from the total number of abrasive grains on the working surface of the grinding wheel, establish the dependence of this parameter on the type of abrasive material, its grain size, manufacturer fabrication technology, and compare the results with the results of other researchers. Experimental studies show that the number of cutting grains is 10–15% more than most researchers believe. Further developments will be aimed at compiling regulatory databases for use in engineering calculations. © 2023, Allerton Press, Inc.
引用
收藏
页码：182 / 185
页数：3
相关论文
共 50 条
  • [41] Determination of the grinding force on optical glass based on a diamond wheel with an ordered arrangement of abrasive grains
    Zhibo Yang
    Dongyu He
    Yuqi WangSun
    Shiyu Zhang
    Hongbin Zhang
    Yanru Shi
    The International Journal of Advanced Manufacturing Technology, 2021, 115 : 1237 - 1248
  • [42] Modeling of regularities of change in profile sizes and wear areas of abrasive wheel grains during grinding
    Kharchenko, Aleksander
    Chasovitina, Anastasia
    Bratan, Sergey
    MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 2088 - 2091
  • [43] Determination of the grinding force on optical glass based on a diamond wheel with an ordered arrangement of abrasive grains
    Yang, Zhibo
    He, Dongyu
    WangSun
    Zhang, Yuqi
    Zhang, Shiyu
    Shi, Hongbin
    ShianLiu
    Zhang, Yanru
    International Journal of Advanced Manufacturing Technology, 2021, 115 (04): : 1237 - 1248
  • [44] The effect of changes in the shape of the wheel cutting surface in the grinding process
    Inst. Sverkhtverdykh Materialov, NAN Ukrainy, Kiev, Ukraine
    Sverkhtverdye Materialy, 2000, (05): : 45 - 52
  • [45] Wheel Working Surface Topography and Grinding Force Distributions in Creep Feed Grinding
    Fujimoto, Masakazu
    Ohishi, Susumu
    Hinaga, Ryosuke
    Kubo, Yuki
    INTERNATIONAL JOURNAL OF AUTOMATION TECHNOLOGY, 2018, 12 (02) : 223 - 229
  • [46] Computational experimental method for determining the number of active grains in abrasive composite material
    M. N. Safonova
    A. S. Syromyatnikova
    E. Yu. Shits
    Journal of Friction and Wear, 2007, 28 (5) : 434 - 439
  • [47] The influence of the tool mechanical characteristic for dressing by the free abrasive on cutting ability of the diamond grinding wheel
    Gusev, V. V.
    Medvedev, A. L.
    OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2013, (04): : 98 - 103
  • [48] OPTICAL EVALUATION OF WORKING CHARACTERISTICS OF GRINDING WHEEL SURFACE.
    Inoue, Makoto
    Usui, Eiji
    Bulletin of the Japan Society of Precision Engineering, 1977, 11 (03): : 133 - 138
  • [49] Determining the Parameters of Grinding Wheels Working Surface Profile
    Kryukov, S. A.
    Kryukova, A. S.
    INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING (ICIE 2017), 2017, 206 : 204 - 209
  • [50] Experimental investigation into surface integrity finished by abrasive jet with grinding wheel as restraint
    Li, Changhe
    Xiu, ShiChao
    Cai, Guangqi
    ADVANCES IN GRINDING AND ABRASIVE TECHNOLOGY XIV, 2008, 359-360 : 244 - +
12345