On the Issue of Determining the Number of Cutting Abrasive Grains on the Working Surface of a Grinding Wheel

被引：0
|
作者：
Fedotov V.V. [1 ]
Osipov A.P. [1 ]
Kiselev E.S. [2 ]
机构：
[1] Syzran Branch of Samara State Technical University, Syzran
[2] Ulyanovsk State Technical University, Ulyanovsk
来源：
Russian Engineering Research | 2023年 / 43卷 / 02期
关键词：
binder; cutting abrasive grains; experimental sample; experimental technique; grinding wheel; penetration depth;
D O I：
10.3103/S1068798X23030097
中图分类号：
学科分类号：
摘要：
Abstract: The work discusses the method of experimental determination of the number of cutting abrasive grains on the working surface of a grinding wheel. We experimentally evaluate the value of the fraction of cutting grains from the total number of abrasive grains on the working surface of the grinding wheel, establish the dependence of this parameter on the type of abrasive material, its grain size, manufacturer fabrication technology, and compare the results with the results of other researchers. Experimental studies show that the number of cutting grains is 10–15% more than most researchers believe. Further developments will be aimed at compiling regulatory databases for use in engineering calculations. © 2023, Allerton Press, Inc.
引用
收藏
页码：182 / 185
页数：3
相关论文
共 50 条
  • [21] Fracture Induced Wear of Abrasive Grains in Surface Grinding Operations
    Jackson, M. J.
    Ahmed, W.
    SURFACE ENGINEERING, PROCEEDINGS, 2006, : 114 - +
  • [22] THERMAL PHENOMENA DURING GRINDING BY CUTTING DISCS WITH A CONTROLLED FORM OF ABRASIVE GRAINS
    Korotkov, V. A.
    OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2007, (04): : 28 - 29
  • [23] Determining the cutting properties of grinding materials when simulating abrasive machining
    Pushkarev O.I.
    Mal'ginova G.M.
    Slavina E.V.
    Russian Engineering Research, 2008, 28 (4) : 382 - 384
  • [24] Phenomenon of Lagging in the Values of Grinding Wheel Performance Characteristics Due to the Radial Transformation of the Cutting Surface of a Wheel under Abrasive Diamond Treatment
    Lavrinenko, V. I.
    JOURNAL OF SUPERHARD MATERIALS, 2023, 45 (06) : 460 - 465
  • [25] Phenomenon of Lagging in the Values of Grinding Wheel Performance Characteristics Due to the Radial Transformation of the Cutting Surface of a Wheel under Abrasive Diamond Treatment
    V. I. Lavrinenko
    Journal of Superhard Materials, 2023, 45 : 460 - 465
  • [26] Some Specific Features in Shaping the Cutting Surface of a Grinding Wheel in Circular Direction under Grinding with the Use of Wheels with a Mixture of SHM Grinding Powders and a Modified Surface of Their Grains
    Lavrinenko, V., I
    Pasichnyi, O. O.
    Poltoratskyi, V. G.
    Solod, V. Yu
    Muzychka, D. G.
    JOURNAL OF SUPERHARD MATERIALS, 2022, 44 (01) : 46 - 56
  • [27] Some Specific Features in Shaping the Cutting Surface of a Grinding Wheel in Circular Direction under Grinding with the Use of Wheels with a Mixture of SHM Grinding Powders and a Modified Surface of Their Grains
    V. I. Lavrinenko
    O. O. Pasichnyi
    V. G. Poltoratskyi
    V. Yu. Solod
    D. G. Muzychka
    Journal of Superhard Materials, 2022, 44 : 46 - 56
  • [28] Simulation of Grinding Surface Roughness by End Face Grinding Wheel with Phyllotactic Abrasive Pattern
    Li, Xingshan
    Shao, Meili
    Wang, Jun
    Lu, Yushan
    APPLIED MECHANICS, MATERIALS AND MANUFACTURING IV, 2014, 670-671 : 543 - 547
  • [29] Recognition of diamond grains on surface of fine diamond grinding wheel
    Key Lab. for Precis. and Non-tradit. Mach. Technol., Dalian Univ. of Technol., Dalian 116024, China
    Dalian Ligong Daxue Xuebao, 2007, 3 (358-362):
  • [30] Recognition of diamond grains on surface of fine diamond grinding wheel
    Huo F.
    Jin Z.
    Kang R.
    Guo D.
    Yang C.
    Frontiers of Mechanical Engineering in China, 2008, 3 (3): : 325 - 331
12345