On the Issue of Determining the Number of Cutting Abrasive Grains on the Working Surface of a Grinding Wheel

被引：0
|
作者：
Fedotov V.V. [1 ]
Osipov A.P. [1 ]
Kiselev E.S. [2 ]
机构：
[1] Syzran Branch of Samara State Technical University, Syzran
[2] Ulyanovsk State Technical University, Ulyanovsk
来源：
Russian Engineering Research | 2023年 / 43卷 / 02期
关键词：
binder; cutting abrasive grains; experimental sample; experimental technique; grinding wheel; penetration depth;
D O I：
10.3103/S1068798X23030097
中图分类号：
学科分类号：
摘要：
Abstract: The work discusses the method of experimental determination of the number of cutting abrasive grains on the working surface of a grinding wheel. We experimentally evaluate the value of the fraction of cutting grains from the total number of abrasive grains on the working surface of the grinding wheel, establish the dependence of this parameter on the type of abrasive material, its grain size, manufacturer fabrication technology, and compare the results with the results of other researchers. Experimental studies show that the number of cutting grains is 10–15% more than most researchers believe. Further developments will be aimed at compiling regulatory databases for use in engineering calculations. © 2023, Allerton Press, Inc.
引用
收藏
页码：182 / 185
页数：3
相关论文
共 50 条
  • [1] A grinding force model allowing for dulling of abrasive wheel cutting grains in plunge cylindrical grinding
    Pereverzev, P. P.
    Pimenov, D. Yu.
    [J]. JOURNAL OF FRICTION AND WEAR, 2016, 37 (01) : 60 - 65
  • [2] A grinding force model allowing for dulling of abrasive wheel cutting grains in plunge cylindrical grinding
    P. P. Pereverzev
    D. Yu. Pimenov
    [J]. Journal of Friction and Wear, 2016, 37 : 60 - 65
  • [3] Determination of embedding depth of abrasive grains on working surface of single-layer brazed CBN grinding wheel
    Ding, Wen-Feng
    Xu, Jiu-Hua
    Fu, Yu-Can
    Su, Hong-Hua
    Xiao, Bing
    Zhou, Lai-Shui
    [J]. Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2007, 17 (03): : 441 - 445
  • [4] Simulation of the working surface of a grinding wheel in complex gear cutting
    Makarov V.M.
    Kosterin A.S.
    [J]. Russian Engineering Research, 2008, 28 (11) : 1125 - 1128
  • [5] Prediction of Blunting Area of Abrasive Grains on a Grinding Wheel
    Dyakonov, Aleksandr A.
    Ardashev, Dmitrii V.
    [J]. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2017, 139 (12):
  • [6] Observation of abrasive grains behavior in contact area of grinding wheel and comparison with grinding wheel model
    Yamada, T.
    Lee, H. S.
    [J]. ADVANCES IN ABRASIVE TECHNOLOGY XI, 2009, 389-390 : 48 - 54
  • [7] Observation of abrasive grains behavior in contact area of grinding wheel and comparison with grinding wheel model
    Yamada, T.
    Lee, H.S.
    [J]. Key Engineering Materials, 2009, 389-390 : 48 - 54
  • [8] Fast Measurement of Abrasive Grains on a Single Layer Brazed Diamond Grinding Wheel Surface
    Cui, Changcai
    Wang, Kexian
    Huang, Guoqin
    Huang, Hui
    [J]. Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2019, 30 (14): : 1639 - 1645
  • [9] Mathematical Model of the Grinding Force With Account for Blunting of Abrasive Grains of the Grinding Wheel
    Ardashev, Dmitrii V.
    Dyakonov, Aleksandr A.
    [J]. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2017, 139 (12):
  • [10] Surface Roughness Prediction Based on the Average Cutting Depth of Abrasive Grains in Belt Grinding
    Qi, Junde
    Chen, Bing
    [J]. 2018 3RD INTERNATIONAL CONFERENCE ON MECHANICAL, CONTROL AND COMPUTER ENGINEERING (ICMCCE), 2018, : 169 - 174
12345