TEGDME Electrolyte Additive for High-performance Zinc Anodes

被引:0
|
作者
Weiguo Zhang
Chong Zhang
Hongzhi Wang
Huanhuan Wang
机构
[1] Tianjin University,Department of Applied Chemistry, School of Chemical Engineering and Technology
关键词
Aqueous zinc ion battery; Zinc dendrite; Hydrogen evolution reaction; Solvation structure; Cycle life;
D O I
暂无
中图分类号
学科分类号
摘要
Aqueous zinc ion batteries (AZIBs) are expected to have a wide range of applications for large-scale electrochemical energy storage systems, but their practical application is severely limited by the presence of zinc dendrites, hydrogen evolution reactions (HER), corrosion reactions, and other problems. Electrolyte optimization is considered to be one of the most effective methods for improving zinc anodes due to its simplicity, low production cost and remarkable effectiveness in suppressing zinc dendrite growth. In this paper, a tetra (ethylene glycol) dimethyl ether (TEGDME) electrolyte additive was used to improve the stability of the zinc anode by adding 0.1 g/L TEGDME to the conventional ZnSO4 electrolyte to prepare a mixed electrolyte. The effect of TEGDME on the side reactions of zinc anode was first assessed by linear sweep voltammetry (LSV) and potentiodynamic polarization. The effect of TEGDME on the structure and morphology of zinc surfaces was observed using an X-ray diffractometer (XRD) and a scanning electron microscope (SEM). And finally, the electrochemical performance of Zn∣Zn symmetric cells, Zn∥Ti asymmetric cells and Zn-MnO2 full cells with ZnSO4 + TEGDME electrolyte was tested by cyclic voltammetry (CV) and galvanostatic cycling. The results show that the addition of TEGDME improves the surface wettability of the Zn anode and reduces the growth of dendrites through solvation structure modulation to suppress HER and zinc corrosion. Thus, TEGDME keeps the Zn anode to maintain a flat surface during charging and discharging, improving the reversibility of plating/stripping. The cycle life of the Zn∥Ti asymmetric cell was improved and the Coulombic efficiency was 100% after 100 cycles. The Zn∥Zn symmetric cells can be cycled stably for 1800 h at a current density of 1 mA/cm2 and a fixed capacity of 1 mA·h/cm2, while the capacity retention of the Zn-MnO2 full cell can be effectively improved from 51.46% to 68.29% at 100 cycles. By using TEGDME electrolyte additives, the cycle life of aqueous zinc ion batteries can be effectively improved, providing a new idea for the development of highly reversible zinc anodes.
引用
收藏
页码:1037 / 1043
页数:6
相关论文
共 50 条
  • [21] High-pressure deformation exposes zinc (002) crystal planes adapted for high-performance zinc anodes
    Bao, Qing-peng
    Sui, Bin -bin
    Wang, Peng-fei
    Gong, Zhe
    Zhang, Yu -hang
    Wu, Yu-han
    Zhao, Li-na
    Tang, Jun-jie
    Zhou, Ming-dong
    Shi, Fa-nian
    ELECTROCHIMICA ACTA, 2024, 478
  • [22] High-Performance InZn Alloy Anodes toward Practical Aqueous Zinc Batteries
    Fayette, Matthew
    Chang, Hee Jung
    Li, Xiaolin
    Reed, David
    ACS ENERGY LETTERS, 2022, 7 (06) : 1888 - 1895
  • [23] A trifunctional electrolyte for high-performance zinc-iodine flow batteries
    Jian, Q. P.
    Wu, M. C.
    Jiang, H. R.
    Lin, Y. K.
    Zhao, T. S.
    JOURNAL OF POWER SOURCES, 2021, 484
  • [24] Hybrid Electrolyte Design for High-Performance Zinc-Sulfur Battery
    Guo, Yuqi
    Chua, Rodney
    Chen, Yingqian
    Cai, Yi
    Tang, Ernest Jun Jie
    Lim, J. J. Nicholas
    Tran, Thu Ha
    Verma, Vivek
    Wong, Ming Wah
    Srinivasan, Madhavi
    SMALL, 2023, 19 (29)
  • [25] Towards high-performance lithium metal anodes via the modification of solid electrolyte interphases
    Hou, Zhen
    Zhang, Jiaolong
    Wang, Wenhui
    Chen, Qianwen
    Li, Baohua
    Li, Chaolin
    JOURNAL OF ENERGY CHEMISTRY, 2020, 45 : 7 - 17
  • [26] Towards high-performance zinc anode for zinc ion hybrid capacitor: Concurrently tailoring hydrodynamic stability, zinc deposition and solvation structure via electrolyte additive
    Huang, Haijian
    Yun, Juwei
    Feng, Hao
    Tian, Tian
    Xu, Jiawei
    Li, Deli
    Xia, Xue
    Yang, Zeheng
    Zhang, Weixin
    ENERGY STORAGE MATERIALS, 2023, 55 : 857 - 866
  • [27] Biomimetic surface design enables a resilient solid electrolyte interphase for high-performance anodes
    Zhai, Yue
    Wei, Zhen
    He, Jiaxing
    Zhao, Ziyun
    Li, Qiang
    Jia, Yiran
    He, Qing
    Wu, Shichao
    Yang, Quan-Hong
    ENERGY STORAGE MATERIALS, 2025, 74
  • [28] Towards high-performance lithium metal anodes via the modification of solid electrolyte interphases
    Zhen Hou
    Jiaolong Zhang
    Wenhui Wang
    Qianwen Chen
    Baohua Li
    Chaolin Li
    Journal of Energy Chemistry, 2020, 45 (06) : 7 - 17
  • [29] An Ionic Liquid Electrolyte Additive for High-Performance Lithium-Sulfur Batteries
    Guan, Zeliang
    Bai, Ling
    Du, Binyang
    MATERIALS, 2023, 16 (23)
  • [30] A Dual-Functional Electrolyte Additive for High-Performance Potassium Metal Batteries
    Park, Jimin
    Jeong, Yeseul
    Kang, Hyokyeong
    Yu, Tae-Yeon
    Xu, Xieyu
    Liu, Yangyang
    Xiong, Shizao
    Lee, Seon Hwa
    Sun, Yang-Kook
    Hwang, Jang-Yeon
    ADVANCED FUNCTIONAL MATERIALS, 2023, 33 (48)