Solidification of Ni-Re Peritectic Alloys

被引:0
|
作者
W. J. Boettinger
D. E. Newbury
N. W. M. Ritchie
M. E. Williams
U. R. Kattner
E. A. Lass
K.-W. Moon
M. B. Katz
J. H. Perepezko
机构
[1] Theiss Research,Materials Science and Engineering Division
[2] National Institute of Standards and Technology,Materials Measurement Science Division
[3] National Institute of Standards and Technology,Department of Materials Science and Engineering
[4] University of Wisconsin,undefined
关键词
D O I
暂无
中图分类号
学科分类号
摘要
Differential thermal analysis (DTA) and microstructural and microprobe measurements of DTA and as-cast Ni-Re alloys with compositions between 0.20 and 0.44 mass fraction Re provide information to resolve differences in previously published Ni-Re phase diagrams. This investigation determines that the peritectic invariant between liquid, Re-rich hexagonal close packed and Ni-rich face center cubic phases, L + HCP → FCC, occurs at 1561.1 °C ± 3.4 °C (1σ) with compositions of liquid, FCC and HCP phases of 0.283 ± 0.036, 0.436 ± 0.026, and 0.828 ± 0.037 mass fraction Re, respectively. Analysis of the microsegregation in FCC alloys yields a partition coefficient for solidification, k = 1.54 ± 0.09 (mass frac./mass frac.). A small deviation from Scheil behavior due to dendrite tip kinetics is documented in as-cast samples. No evidence of an intermetallic phase is observed.
引用
收藏
页码:772 / 788
页数:16
相关论文
共 50 条
  • [21] Ni-Re (Nickel-Rhenium)
    Okamoto, H.
    JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 2012, 33 (04) : 346 - 346
  • [22] Ni-Re intermetallic oxygen getters
    Gozzi, D
    Iervolino, M
    Latini, A
    Belluccii, A
    VACUUM, 2006, 80 (08) : 930 - 938
  • [23] Peritectic solidification mechanism and accompanying microhardness enhancement of rapidly quenched Ni–Zr alloys
    Y. F. Si
    H. P. Wang
    P. Lü
    B. Wei
    Applied Physics A, 2019, 125
  • [24] Phase selection during solidification of peritectic alloys
    Umeda, T
    Okane, T
    Kurz, W
    ACTA MATERIALIA, 1996, 44 (10) : 4209 - 4216
  • [25] RAPID SOLIDIFICATION OF PERITECTIC ALUMINUM-ALLOYS
    ADKINS, NJE
    SAUNDERS, N
    TSAKIROPOULOS, P
    MATERIALS SCIENCE AND ENGINEERING, 1988, 98 : 217 - 219
  • [26] Studies of chemical-catalytic formation of Ni-Re (Mo, W)-B alloys
    Krutskikh, V. M.
    Drovosekov, A. B.
    Ivanov, M. V.
    RUSSIAN JOURNAL OF ELECTROCHEMISTRY, 2016, 52 (09) : 873 - 884
  • [27] Steam reforming of methane on the Ni-Re catalysts
    Borowiecki, T.
    Denis, A.
    Panczyk, M.
    Gac, W.
    Stolecki, K.
    POLISH JOURNAL OF CHEMISTRY, 2008, 82 (09) : 1733 - 1742
  • [28] Interdiffusion in the Ni-Re System: Evaluation of Uncertainties
    Boettinger, W. J.
    Williams, M. E.
    Moon, K. -W.
    McFadden, G. B.
    Patrone, P. N.
    Perepezko, J. H.
    JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 2017, 38 (05) : 750 - 763
  • [29] Peritectic solidification mechanism and accompanying microhardness enhancement of rapidly quenched Ni-Zr alloys
    Si, Y. F.
    Wang, H. P.
    Lu, P.
    Wei, B.
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2019, 125 (02):
  • [30] Corrosion and Electrochemical Properties of Alloys of Ni-Re Systems Alloyed with Zirconium, Hafnium, Tungsten, and Palladium
    Parshutin, V. V.
    Paramonov, A. M.
    Koval, A. V.
    SURFACE ENGINEERING AND APPLIED ELECTROCHEMISTRY, 2024, 60 (02) : 156 - 170