Dopant effect and characterization of polypyrrole-cellulose composites prepared by in situ polymerization process

被引:0
|
作者
Chunyue Ding
Xueren Qian
Gang Yu
Xianhui An
机构
[1] Northeast Forestry University,Key Laboratory of Bio
来源
Cellulose | 2010年 / 17卷
关键词
Sulfonic dopants; Polypyrrole-cellulose composites; Conductivity;
D O I
暂无
中图分类号
学科分类号
摘要
Polypyrrole (PPy)-cellulose composites were prepared by in situ polymerization of pyrrole in pulp suspension using ferric chloride as an oxidant. Some sulfonic compounds including p-toluenesulfonic acid and its sodium salt (PTSA and PTSA-Na), benzenesulfonic acid (BSA), dodecylbenzene sulfonic acid and its sodium salt (DBSA and DBSA-Na), 2-naphthalene sulfonic acid (NSA) and 9,10-anthraquinone-2-sulfonic acid sodium salt (AQSA-Na) were used as dopants, and their effect on the conductivity of PPy-cellulose composite was investigated. The results showed that the species and dose of dopants had significant effect on the surface resistivity and environmental stability of PPy-cellulose composite. As the dopant, PTSA and DBSA had a superior doping effect compared to their sodium salts. The doping result of BSA was close to that of PTSA. NSA bearing a naphthalene ring and AQSA-Na bearing an anthraquinone ring gave the best conductivity. Using NSA or AQSA-Na as a dopant, along with suitable polymerization conditions, the PPy-cellulose composite obtained showed a surface resistivity as low as 20 Ω cm−2. For most dopants, the lowest surface resistivity could be obtained when the molar ratio of dopant to pyrrole was 1:1. Both ATR-FTIR (attenuated total reflection-Fourier transform infrared spectroscopy) and XPS (X-ray photoelectron spectroscopy) analysis confirmed that the PPy on pulp fibers doped with PTSA, PTSA-Na, NSA and AQSA-Na had different doping levels. The higher doping level of the PPy in the composites doped with NAS and AQSA-Na might be related to the stronger interaction of cellulose with PPy chains. Both SEM (scanning electron microscopy) and AFM (atomic force microscopy) observation revealed the fine grain microstructure of the PPy on the composites with average grain sizes in the range of 100–200 nm, and the PPy on the samples doped with NSA and AQSA-Na exhibited quite different morphology as compared to those doped with PTSA and its sodium salt.
引用
收藏
页码:1067 / 1077
页数:10
相关论文
共 50 条
  • [21] Cellulose-based composites for membranes by "in situ" radical polymerization
    Stanciu, Nicoleta Doriana
    Vuluga, Dumitru Mircea
    Albu, Ana-Maria
    Hantaide, Thierry
    Teodorescu, Mircea
    Cioaca, Mihai Bogdan
    MOLECULAR CRYSTALS AND LIQUID CRYSTALS, 2008, 484 : 437 - 451
  • [22] Electrical conductivity of polypyrrole/expanded graphite composites prepared by chemical oxidation polymerization
    Wu, Xinming
    Liu, Manman
    Jia, Min
    SYNTHETIC METALS, 2013, 177 : 60 - 64
  • [23] Effect of oxidizing agent of polypyrrole layer prepared by vapor polymerization
    Cho, JH
    Kim, JS
    Yu, JB
    Sohn, SO
    Huh, JS
    ECO-MATERIALS PROCESSING & DESIGN VI, 2005, 486-487 : 526 - 529
  • [24] Characterizations of expanded graphite/polymer composites prepared by in situ polymerization
    Zheng, GH
    Wu, JS
    Wang, WP
    Pan, CY
    CARBON, 2004, 42 (14) : 2839 - 2847
  • [25] Crystalline nanocellulose/thermoplastic polyester composites prepared by in situ polymerization
    Clarke, Ashley
    Vasileiou, Alexandros A.
    Kontopoulou, Marianna
    POLYMER ENGINEERING AND SCIENCE, 2019, 59 (05): : 989 - 995
  • [26] Poplar wood-methylolurea composites prepared by in situ polymerization
    Lang, Qian
    She, Ying
    Chen, He-yu
    Pu, Jun-wen
    JOURNAL OF APPLIED POLYMER SCIENCE, 2013, 130 (02) : 933 - 938
  • [27] High-performance supercapacitor based on multi-structural CuS@polypyrrole composites prepared by in situ oxidative polymerization
    Peng, Hui
    Ma, Guofu
    Sun, Kanjun
    Mu, Jingjing
    Wang, Hui
    Lei, Ziqiang
    JOURNAL OF MATERIALS CHEMISTRY A, 2014, 2 (10) : 3303 - 3307
  • [28] IONIC CONDUCTIVE SILICA-POLYPYRROLE COMPOSITES OBTAINED BY IN-SITU POLYMERIZATION
    Baicea, C.
    Ivan, A.
    Trisca-Rusu, C.
    Nechifor, A. C.
    Vaireanu, D. I.
    Voicu, S. I.
    Nechifor, G.
    2010 INTERNATIONAL SEMICONDUCTOR CONFERENCE (CAS), VOLS 1 AND 2, 2010, : 359 - 362
  • [29] Preparation of Highly Conductive Polypyrrole/Graphite Oxide Composites via in situ Polymerization
    Gu, Z.
    Zhang, L.
    Li, C.
    JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, 2009, 48 (06): : 1093 - 1102
  • [30] Biodegradable Composites: Ramie Fibre Reinforced PLLA-PCL Composite Prepared by in Situ Polymerization Process
    Xu, Hong
    Wang, Longhai
    Teng, Cuiqing
    Yu, Muhuo
    POLYMER BULLETIN, 2008, 61 (05) : 663 - 670