Experimental study of lateral-torsional buckling behavior of stainless steel welded I-section beams

被引：0
|
作者：
Yuanqing Wang
Lu Yang
Bo Gao
Yongjiu Shi
Huanxin Yuan
机构：
[1] Tsinghua University,Key Laboratory of Civil Engineering Safety and Durability of China Education Ministry, Department of Civil Engineering
[2] Beijing University of Technology,The College of Architecture and Civil Engineering
来源：
International Journal of Steel Structures | 2014年 / 14卷
关键词：
lateral-torsional buckling; stainless steel; welded I-section beam; residual stress; four-point bending test;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Investigations on lateral-torsional buckling behavior of stainless steel welded I-section beams were carried out through fourpoint bending tests. The Chinese austenitic stainless steel adopted in this study contains approximately 17% of Cr, which could be graded as EN 1.4401. The non-linear stress-strain relationship of the material, the residual stress distribution of the section and the ultimate moment capacity of the welded I-section beams were obtained from the experiments, and they were compared with those results predicted by analytical models recommended by several researchers. Besides, a new model is proposed to predict the residual stress distribution of the stainless steel welded I-section beams.
引用
收藏
页码：411 / 420
页数：9
相关论文
共 50 条
  • [31] Rapid evaluation of lateral-torsional buckling of European standard I-section cantilevers
    Yilmaz, Tolga
    MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, 2024, 52 (07) : 4241 - 4259
  • [32] Interaction of local buckling in welded I-section steel beams
    Xi'an Jianzhu Keji Daxue Xuebao, 4 (438-443):
  • [33] An assessment of the lateral-torsional buckling and post-buckling behaviour of steel I-section beams using a geometrically exact beam finite element
    Goncalves, Rodrigo
    THIN-WALLED STRUCTURES, 2019, 143
  • [34] Experimental verification of lateral-torsional buckling of steel I-beams with tapered flanges
    Kus, J.
    STABILITY AND DUCTILITY OF STEEL STRUCTURES 2019, 2019, : 673 - 681
  • [35] Lateral-torsional buckling of monosymmetric I-beams with compact section
    Meijo Univ, Nagoya, Japan
    Struct Eng Earthquqke Eng, 2 (229s-241s):
  • [36] Experimental study of steel truss lateral-torsional buckling
    Jankowska-Sandberg, Joanna
    Kolodziej, Jaroslaw
    ENGINEERING STRUCTURES, 2013, 46 : 165 - 172
  • [37] Two calculation methods for buckling reduction factors of stainless steel welded I-section beams
    Yang, Lu
    Wang, Yuanqing
    Gao, Bo
    Shi, Yongjiu
    Yuan, Huanxin
    THIN-WALLED STRUCTURES, 2014, 83 : 128 - 136
  • [38] Ayrton-Perry approach for the lateral-torsional buckling resistance of mono-symmetric I-section beams
    da Silva, L. Simoes
    Gomes, J. O.
    Ferreira Filho, J. O.
    Carvalho, H.
    THIN-WALLED STRUCTURES, 2025, 211
  • [39] Experimental and Numerical Study on the Lateral-Torsional Buckling of Steel C-Beams with Variable Cross-Section
    Mascolo, Ida
    Modano, Mariano
    Fiorillo, Antimo
    Fulgione, Marcello
    Pasquino, Vittorio
    Fraternali, Fernando
    METALS, 2018, 8 (11)
  • [40] Lateral-torsional buckling of high strength steel beams: Experimental resistance
    Tankova, Trayana
    Rodrigues, Filipe
    Leitao, Carlos
    Martins, Claudio
    da Silva, Luis Simoes
    THIN-WALLED STRUCTURES, 2021, 164
12345