Experimental study of lateral-torsional buckling behavior of stainless steel welded I-section beams

被引：0
|
作者：
Yuanqing Wang
Lu Yang
Bo Gao
Yongjiu Shi
Huanxin Yuan
机构：
[1] Tsinghua University,Key Laboratory of Civil Engineering Safety and Durability of China Education Ministry, Department of Civil Engineering
[2] Beijing University of Technology,The College of Architecture and Civil Engineering
来源：
International Journal of Steel Structures | 2014年 / 14卷
关键词：
lateral-torsional buckling; stainless steel; welded I-section beam; residual stress; four-point bending test;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Investigations on lateral-torsional buckling behavior of stainless steel welded I-section beams were carried out through fourpoint bending tests. The Chinese austenitic stainless steel adopted in this study contains approximately 17% of Cr, which could be graded as EN 1.4401. The non-linear stress-strain relationship of the material, the residual stress distribution of the section and the ultimate moment capacity of the welded I-section beams were obtained from the experiments, and they were compared with those results predicted by analytical models recommended by several researchers. Besides, a new model is proposed to predict the residual stress distribution of the stainless steel welded I-section beams.
引用
收藏
页码：411 / 420
页数：9
相关论文
共 50 条
  • [21] Lateral-torsional buckling of stainless steel I-beams in case of fire
    Real, P. M. M. Vila
    Lopes, N.
    da Silva, L. Simoes
    Franssen, J. -M.
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2008, 64 (11) : 1302 - 1309
  • [22] Experimental and Analytical Study on Local Buckling Behavior of High Strength Steel Welded I-Section Beams
    Shi, Yongjiu
    Xu, Kelong
    INTERNATIONAL JOURNAL OF STEEL STRUCTURES, 2019, 19 (04) : 1171 - 1190
  • [23] Experimental and Analytical Study on Local Buckling Behavior of High Strength Steel Welded I-Section Beams
    Yongjiu Shi
    Kelong Xu
    International Journal of Steel Structures, 2019, 19 : 1171 - 1190
  • [24] Experimental and Numerical Study on Lateral-Torsional Buckling Behavior of High Performance Steel Beams
    Xu, Y. L.
    Shi, Y. J.
    Wu, Y. R.
    Ban, H. Y.
    INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS, 2018, 18 (07)
  • [25] Some thoughts on a surprising result concerning the lateral-torsional buckling of monosymmetric I-section beams
    Camotim, Dinar
    Andrade, Anisio
    Basaglia, Cilmar
    THIN-WALLED STRUCTURES, 2012, 60 : 216 - 221
  • [26] Experimental study on lateral buckling behavior of stainless steel beams with welded I-sections
    Wang, Yuanqing
    Gao, Bo
    Dai, Guoxin
    Shi, Yongjiu
    Liao, Dongfan
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2011, 32 (11): : 143 - 148
  • [27] Buckling of stainless steel welded I-section columns
    Tuezney, Stijn
    Lauwens, Kathleen
    Afshan, Sheida
    Rossi, Barbara
    ENGINEERING STRUCTURES, 2021, 236
  • [28] The continuous strength method for lateral-torsional buckling of stainless steel I-beams
    Anwar-Us-Saadat, Mohammad
    Ashraf, Mahmud
    THIN-WALLED STRUCTURES, 2018, 130 : 148 - 160
  • [29] Lateral-torsional buckling of ferritic stainless steel beams in case of fire
    Real, P. Vila
    Lopes, N.
    Silva, L.
    Franssen, J.-M.
    ART OF RESISTING EXTREME NATURAL FORCES, 2007, 58 : 91 - 100
  • [30] On the resistance evaluation of lateral-torsional buckling of bisymmetrical I-section beams using finite element simulations
    Gizejowski, Marian
    Szczerba, Radoslaw
    Gajewski, Marcin
    Stachura, Zbigniew
    XXV POLISH - RUSSIAN - SLOVAK SEMINAR -THEORETICAL FOUNDATION OF CIVIL ENGINEERING, 2016, 153 : 180 - 188
12345