Formation of large area closely packed carbon onions film by plasma-based ion implantation

被引:0
|
作者
Naohiro Matsumoto
Hiroshi Kinoshita
Junho Choi
Takahisa Kato
机构
[1] University of Hyogo,Department of Mechanical Engineering, Graduate School of Engineering
[2] The University of Tokyo,Department of Mechanical Engineering
来源
关键词
D O I
暂无
中图分类号
学科分类号
摘要
A substantial quantity of carbon onions in a durable film state is indispensable for its applications. In this study, large area fabrication of closely packed homogeneous carbon onion nanoparticle film using plasma-based ion implantation was demonstrated. Ag film deposited on a Si substrate was used as the implantation target for the hydrocarbon ions accelerated at 20 kV. Nanoparticles with the mean diameter of 7.5 nm were formed at the grain boundary of the Ag film. Carbon onions with the mean diameter of 17.4 nm were synthesized and arranged to a closely packed nanoparticle film with the thickness of around 200 nm by gradual thermal vaporization of the Ag. The closely packed configuration was achieved due to the isolated growth of carbon onion nanoparticle and high uniformity of the diameter. This process can be used in principle large area formation compered to typical ion implantation technique of carbon onion nanoparticle film, which can be applicable for the practical use in mechanical and electrochemical applications.
引用
收藏
相关论文
共 50 条
  • [41] Coating and ion implantation to the inner surface of a pipe by metal plasma-based ion implantation and deposition
    Yukimura, K
    Kuze, E
    Kumagai, M
    Kohata, M
    Numata, K
    Saito, H
    Maruyama, T
    Ma, XX
    SURFACE & COATINGS TECHNOLOGY, 2003, 169 : 411 - 414
  • [42] Carbon nanometer films prepared by plasma-based ion implantation on single crystalline Si wafer
    Liao, JX
    Liu, WM
    Xu, T
    Xue, QJ
    APPLIED SURFACE SCIENCE, 2004, 226 (04) : 387 - 392
  • [43] Properties of hydrogenated amorphous carbon thin films deposited by plasma-based ion implantation method
    Ishihara, M
    Suzuki, M
    Watanabe, T
    Tsuda, O
    Nakamura, T
    Tanaka, A
    Koga, Y
    DIAMOND AND RELATED MATERIALS, 2004, 13 (4-8) : 1449 - 1453
  • [44] Microstructure of interface for high-adhesion DLC film on metal substrates by plasma-based ion implantation
    Yatsuzuka, Mitsuyasu
    Oka, Yoshihiro
    Nishijima, Masahiko
    Hiraga, Kenji
    VACUUM, 2008, 83 (01) : 190 - 197
  • [45] Plasma-based carbon ion implantation of aluminium at different process times in a pulse-ignited methane plasma
    Baba, K.
    Hatada, R.
    Flege, S.
    Kraft, G.
    Ensinger, W.
    SURFACE & COATINGS TECHNOLOGY, 2009, 203 (17-18): : 2617 - 2619
  • [46] Ballistic-Mode Plasma-Based Ion Implantation for Surface-Resistivity Modification of Polyimide Film
    Park, Byungjae
    Kim, Jeehyun
    Cho, Moohyun
    Namkung, Won
    Kim, Sang Jung
    Yoo, Hyo Yol
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 2012, 40 (06) : 1749 - 1752
  • [47] Positive-plasma-bias method for plasma-based ion implantation and deposition
    Ikehata, T.
    Sasaki, R.
    Tanaka, T.
    Yukimura, K.
    SURFACE & COATINGS TECHNOLOGY, 2010, 204 (18-19): : 2881 - 2891
  • [48] Effect of pulse waveform on plasma sheath expansion in plasma-based ion implantation
    Qi, S
    Ma, XX
    Xia, LF
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2000, 170 (3-4): : 397 - 405
  • [49] Evaluation of pinhole defect in DLC film prepared by hybrid process of plasma-based ion implantation and deposition
    Yatsuzuka, Mitsuyasu
    Tateiwa, Junichi
    Uchida, Hitoshi
    VACUUM, 2006, 80 (11-12) : 1351 - 1355
  • [50] Ion current on the inner surface of a pipe by plasma-based ion implantation and deposition
    Ma, XX
    Yukimura, K
    Ikehata, T
    Miyagawa, Y
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2003, 206 : 813 - 816