Estimating the effect of cutting parameters on surface finish and power consumption during high speed machining of AISI 1045 steel using Taguchi design and ANOVA

被引：116
|
作者：
Bhattacharya A. [1 ]
Das S. [2 ]
Majumder P. [2 ]
Batish A. [1 ]
机构：
[1] Mechanical Engineering Department, Thapar University
[2] Mechanical Engineering Department, Kalyani Government Engineering College
来源：
Production Engineering | 2009年 / 3卷 / 01期
关键词：
ANOVA; High speed machining; Power consumption; Surface roughness; Taguchi design;
D O I：
10.1007/s11740-008-0132-2
中图分类号：
学科分类号：
摘要：
The present paper outlines an experimental study to investigate the effects of cutting parameters on finish and power consumption by employing Taguchi techniques. The high speed machining of AISI 1045 using coated carbide tools was investigated. A combined technique using orthogonal array and analysis of variance was employed to investigate the contribution and effects of cutting speed, feed rate and depth of cut on three surface roughness parameters and power consumption. The results showed a significant effect of cutting speed on the surface roughness and power consumption, while the other parameters did not substantially affect the responses. Thereafter, optimal cutting parameters were obtained. © German Academic Society for Production Engineering (WGP) 2008.
引用
收藏
页码：31 / 40
页数：9
相关论文
共 50 条
  • [41] Effect of cutting parameters on surface roughness using orthogonal array in hard turning of AISI 1045 steel with YT5 tool
    Zeqing Xiao
    Xiaoping Liao
    Zhenhong Long
    Ming Li
    The International Journal of Advanced Manufacturing Technology, 2017, 93 : 273 - 282
  • [42] OPTIMIZATION OF PROCESS PARAMETERS AFFECTING CUTTING FORCE, POWER CONSUMPTION AND SURFACE ROUGHNESS USING TAGUCHI-BASED GRAY RELATIONAL ANALYSIS IN TURNING AISI 1040 STEEL
    Akgun, Mahir
    SURFACE REVIEW AND LETTERS, 2022, 29 (03)
  • [43] A Numerical Model for Predicting the Effect of Tool Nose Radius on Machining Process Performance during Orthogonal Cutting of AISI 1045 Steel
    Tagiuri, Zakaria Ahmed M.
    Dao, Thien-My
    Samuel, Agnes Marie
    Songmene, Victor
    MATERIALS, 2022, 15 (09)
  • [44] Optimization of Cutting Parameters using Cryogenically Treated High Speed Steel Tool by Taguchi Application
    Singh, Lakhwinder Pal
    Singh, Jagtar
    INTERNATIONAL JOURNAL OF MANUFACTURING MATERIALS AND MECHANICAL ENGINEERING, 2013, 3 (01) : 26 - 38
  • [45] A comparative study on the surface finish achieved during face milling of AISI 1045 steel components using eco-friendly cutting fluids in near dry condition
    Dennison M.S.
    Meji M.A.
    Nelson A.J.R.
    Balakumar S.
    Prasath K.
    International Journal of Machining and Machinability of Materials, 2019, 21 (5-6) : 337 - 356
  • [46] Optimization of WEDM parameters using Taguchi technique and Response Surface Methodology in machining of AISI D2 Steel
    Singh, Vikram
    Pradhan, S. K.
    12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 1597 - 1608
  • [47] Effect of dynamic recrystallization at tool-chip interface on accelerating tool wear during high-speed cutting of AISI1045 steel
    Pu, C. L.
    Zhu, G.
    Yang, S. B.
    Yue, E. B.
    Subramanian, S. V.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2016, 100 : 72 - 80
  • [48] STUDY OF WEAR AND SURFACE FINISH DURING SPARK EROSION MACHINING OF HIGH-SPEED TOOL STEEL
    RAMASWAMI, R
    RAJ, SL
    WEAR, 1973, 24 (02) : 153 - 160
  • [49] Optimization of cutting parameters for surface roughness in turning of studs manufactured from AISI 5140 steel using the Taguchi method
    Kahraman, Funda
    MATERIALS TESTING, 2017, 59 (01) : 77 - 80
  • [50] Microscopic Observation of White Band within Shear Zone of Chip Produced during High Speed Machining of AISI 1045 Hardness Steel
    Duan, Chunzheng
    Kong, Weisen
    Wang, Zhaoxi
    Wang, Minjie
    ADVANCED MATERIALS AND COMPUTER SCIENCE, PTS 1-3, 2011, 474-476 : 1292 - 1295
12345