Estimating the effect of cutting parameters on surface finish and power consumption during high speed machining of AISI 1045 steel using Taguchi design and ANOVA

被引：116

作者：

Bhattacharya A. ^{[1
]}

Das S. ^{[2
]}

Majumder P. ^{[2
]}

Batish A. ^{[1
]}

机构：

[1] Mechanical Engineering Department, Thapar University

[2] Mechanical Engineering Department, Kalyani Government Engineering College

来源：

Production Engineering | 2009年 / 3卷 / 01期

关键词：

ANOVA; High speed machining; Power consumption; Surface roughness; Taguchi design;

D O I：

10.1007/s11740-008-0132-2

中图分类号：

学科分类号：

摘要：

The present paper outlines an experimental study to investigate the effects of cutting parameters on finish and power consumption by employing Taguchi techniques. The high speed machining of AISI 1045 using coated carbide tools was investigated. A combined technique using orthogonal array and analysis of variance was employed to investigate the contribution and effects of cutting speed, feed rate and depth of cut on three surface roughness parameters and power consumption. The results showed a significant effect of cutting speed on the surface roughness and power consumption, while the other parameters did not substantially affect the responses. Thereafter, optimal cutting parameters were obtained. © German Academic Society for Production Engineering (WGP) 2008.

引用

页码：31 / 40

页数：9

共 50 条

[31] The Optimization of Machining Parameters Using the Taguchi Method for Surface Roughness of AISI 8660 Hardened Alloy Steel
Motorcu, Ali Rizzi
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2010, 56 (06): : 391 - 401
[32] A study of cutting forces and surface finish in high-speed machining of AISI H13 tool steel using carbide tools with TiAlN based coatings
Mativenga, PT
Hon, KKB
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2003, 217 (02) : 143 - 151
[33] EVALUATION OF FORCES, TOOL WEAR AND SURFACE FINISH DURING ORTHOGONAL MACHINING AISI 1020 STEEL IN THREE CUTTING ENVIRONMENTS
Chandrasekaran, Vishnu Vardhan
Payton, Lewis N.
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 2B, 2013,
[34] Effect of the Cutting Parameters on Surface Roughness, Power Consumption and Machine Noise in Machining of R260 Steel
Karabulut, Sener
Sahinoglu, Abidin
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2018, 21 (01): : 237 - 244
[35] Design optimization of cutting parameters for turning of AISI 304 austenitic stainless steel using Taguchi method
Kulkarni, Atul
Joshi, Girish
Sargade, V. G.
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2013, 20 (04) : 252 - 258
[36] On adiabatic shear localized fracture during serrated chip evolution in high speed machining of hardened AISI 1045 steel
Gu Liyao
Wang Minjie
Duan Chunzheng
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2013, 75 : 288 - 298
[37] An optimization method of the machining parameters in high-speed machining of stainless steel using coated carbide tool for best surface finish
Ahmad Hamdan
Ahmed A. D. Sarhan
Mohd Hamdi
The International Journal of Advanced Manufacturing Technology, 2012, 58 : 81 - 91
[38] ANALYSIS OF THE CUTTING TEMPERATURE AND SURFACE ROUGHNESS DURING THE ORTHOGONAL MACHINING OF AISI 4140 ALLOY STEEL VIA THE TAGUCHI METHOD
Motorcu, Ali Riza
Isik, Yahya
Kus, Abdil
Cakir, Mustafa Cemal
MATERIALI IN TEHNOLOGIJE, 2016, 50 (03): : 343 - 351
[39] An optimization method of the machining parameters in high-speed machining of stainless steel using coated carbide tool for best surface finish
Hamdan, Ahmad
Sarhan, Ahmed A. D.
Hamdi, Mohd
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 58 (1-4): : 81 - 91
[40] Effect of cutting parameters on surface roughness using orthogonal array in hard turning of AISI 1045 steel with YT5 tool
Xiao, Zeqing
Liao, Xiaoping
Long, Zhenhong
Li, Ming
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 93 (1-4): : 273 - 282

← 1 2 3 4 5 →