Wear and Corrosion Behavior of Cryogenic Friction Stir Processed AZ31B Alloy

被引：0

作者：

C. Rathinasuriyan

R. Sankar

机构：

[1] Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology,Department of Mechanical Engineering

[2] SRM University,Department of Mechanical Engineering

来源：

Journal of Materials Engineering and Performance | 2021年 / 30卷

关键词：

corrosion resistance; cryogenic coolant; friction stir processing (FSP); magnesium alloy; SEM; wear rate;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

This research work investigated the influence of friction stir processing under cryogenic treatment on the wear and corrosion behavior of an extruded AZ31B alloy. The experimental work that employed rotational speeds of 800, 1000, and 1200 rpm have been used, keeping the tool feed rate constant at 60 mm/min. The wear mechanism of the AZ31B alloy and cryogenic friction stir processed specimens were studied using a high magnification of SEM images. A lower wear rate was attained under cryogenic conditions which are around 20% better than the base metal. The results revealed the achievement of a lower corrosion rate at the rotational speed of 1000 rpm. The presence of fine grains and the absence of defects in the processed region lead to higher hardness.

引用

页码：3118 / 3128

页数：10

共 50 条

[31] Enhancing grain refinement and corrosion behavior in AZ31B magnesium alloy via stationary shoulder friction stir processing
Patel, Vivek
Li, Wenya
Andersson, Joel
Li, Na
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 17 : 3150 - 3156
[32] Effect of overlapping ratio on mechanical properties and formability of friction stir processed Mg AZ31B alloy
Venkateswarlu, G.
Devaraju, D.
Davidson, M. J.
Kotiveerachari, B.
Tagore, G. R. N.
MATERIALS & DESIGN, 2013, 45 : 480 - 486
[33] Research of Submerged Friction Stir Welded AZ31B Magnesium Alloy
Wang Kuaishe
Zhou Longhai
Wu Jialei
Wang Wen
RARE METAL MATERIALS AND ENGINEERING, 2012, 41 (06) : 1111 - 1115
[34] Microcapillary Polarization of Friction Stir Welds in AZ31B Magnesium Alloy
Savguira, Y.
North, T. H.
Thorpe, S. J.
CORROSION (GENERAL) - 225TH ECS MEETING, 2014, 61 (20): : 73 - 79
[35] An experimental investigation on friction stir welding of AZ31B magnesium alloy
Padmanaban, G.
Balasubramanian, V.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 49 (1-4): : 111 - 121
[36] Tensile properties of friction stir welded AZ31B Mg alloy
Ha, Seon Mi
Kim, Sangshik
Yim, Chang Dong
Lee, Chang Gil
Kim, Sung-Joon
ADVANCES IN NANOMATERIALS AND PROCESSING, PTS 1 AND 2, 2007, 124-126 : 1357 - +
[37] CRYOGENIC BURNISHING OF AZ31B Mg ALLOY FOR ENHANCED CORROSION RESISTANCE
Pu, Z.
Song, G. -L.
Yang, S.
Dillon, O. W., Jr.
Puleo, D. A.
Jawahir, I. S.
MAGNESIUM TECHNOLOGY 2011, 2011, : 513 - 518
[38] Effect of Grain Size on the Corrosion Resistance of Friction Stir Welded Mg Alloy AZ31B Joints
Kish, J. R.
Williams, G.
McDermid, J. R.
Thuss, J. M.
Glover, C. F.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2014, 161 (09) : C405 - C411
[39] Effect of welding flash on the corrosion of friction stir spot welded AZ31B
Savguira, Y.
Liu, W. H.
North, T. H.
Thorpe, S. J.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2017, 68 (04): : 423 - 435
[40] Corrosion behavior of friction stir welded AZ31B magnesium alloy with plasma electrolytic oxidation coating formed in silicate electrolyte
Chen, Tingfang
Xue, Wenbin
Li, Yongliang
Liu, Xiaolong
Du, Jiancheng
MATERIALS CHEMISTRY AND PHYSICS, 2014, 144 (03) : 462 - 469

← 1 2 3 4 5 →