Providing the Uniformity of Measurements of the Thickness of Metallic Coatings by Eddy-Current Phase Thickness Gages During Their Calibration and Verification

被引：0
|
作者：
S. S. Golubev
N. I. Smirnova
M. I. Skladanovskaya
机构：
[1] Federal Agency for Technical Regulation and Metrology ROSSTANDART,
[2] Mendeleev All-Russia Research Institute of Metrology (VNIIM),undefined
[3] St. Petersburg Mining University,undefined
来源：
Measurement Techniques | 2017年 / 60卷
关键词：
metallic coatings; thickness; eddy-current thickness gage; thickness standards;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Problems of providing uniformity of measurements of the thickness of metallic coatings by the eddy-current phase method are examined. The physical principles of the method as well as the design and metrological characteristics of the measuring instruments are analyzed. The dependences of the error of measuring the thickness of metallic coatings on the influencing parameters during graduation, verification, and calibration are obtained. The requirements imposed on the electrophysical parameters of metallic coating thickness standards are formulated.
引用
收藏
页码：552 / 557
页数：5
相关论文
共 39 条
  • [31] Eddy-current testing of the hardness, wear resistance, and thickness of coatings prepared by gas-powder laser cladding
    Makarov, A. V.
    Gorkunov, E. S.
    Malygina, I. Yu.
    Kogan, L. Kh.
    Savrai, R. A.
    Osintseva, A. L.
    RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING, 2009, 45 (11) : 797 - 805
  • [32] 2-PARAMETER GAP INDEPENDENCE IN EDDY-CURRENT THICKNESS GAUGING ON CONDUCTING PLATES, STRIPS, FILMS, AND COATINGS
    SANDOVSKII, VA
    ROMANOV, VA
    SOVIET JOURNAL OF NONDESTRUCTIVE TESTING-USSR, 1982, 18 (02): : 116 - 119
  • [33] OPTIMIZATION OF THICKNESS INSPECTION OF ELECTRICALLY CONDUCTIVE SINGLE-LAYER COATINGS WITH LAID-ON EDDY-CURRENT TRANSDUCERS
    OSTANIN, YY
    SOVIET JOURNAL OF NONDESTRUCTIVE TESTING-USSR, 1981, 17 (10): : 765 - 770
  • [34] Eddy-current testing of the hardness, wear resistance, and thickness of coatings prepared by gas-powder laser cladding
    A. V. Makarov
    E. S. Gorkunov
    I. Yu. Malygina
    L. Kh. Kogan
    R. A. Savrai
    A. L. Osintseva
    Russian Journal of Nondestructive Testing, 2009, 45 : 797 - 805
  • [35] PHASE-SENSITIVE, EDDY CURRENT, WALL-THICKNESS MEASUREMENTS ON TURBINE BLADES
    SMITH, CF
    DUNNILL, WA
    MCDANIEL, ML
    MATERIALS EVALUATION, 1971, 29 (02) : A26 - &
  • [36] Thickness and Permeability Estimation of Metallic Plates by Triple-Frequency Eddy-Current Testing With Probe Lift-Off
    Xia, Zihan
    Huang, Ruochen
    Lu, Mingyang
    Yin, Wuliang
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2024, 73 : 1 - 8
  • [37] TWO-PARAMETER GAP INDEPENDENCE IN EDDY-CURRENT THICKNESS GAUGING ON CONDUCTING PLATES, STRIPS, FILMS, AND COATINGS.
    SANDOVSKII, V.A.
    ROMANOV, V.A.
    1982, V 18 (N 2): : 116 - 119
  • [38] Coupling Relationship and Decoupling Method for Thickness and Conductivity Measurement of Ultra-Thin Metallic Coating Using Swept-Frequency Eddy-Current Technique
    Xu, Jin
    Wang, Dongli
    Xin, Wei
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2022, 71
  • [39] A Technique for Multi-Parameter Signal Processing of an Eddy-Current Probe for Measuring the Thickness of Non-Conductive Coatings on Non-Magnetic Electrically Conductive Base Metals
    Syasko, Michael
    Solomenchuk, Pavel
    Soloviev, Igor'
    Ampilova, Natalia
    APPLIED SCIENCES-BASEL, 2023, 13 (08):
1234