Providing the Uniformity of Measurements of the Thickness of Metallic Coatings by Eddy-Current Phase Thickness Gages During Their Calibration and Verification

被引：0

作者：

S. S. Golubev

N. I. Smirnova

M. I. Skladanovskaya

机构：

[1] Federal Agency for Technical Regulation and Metrology ROSSTANDART,

[2] Mendeleev All-Russia Research Institute of Metrology (VNIIM),undefined

[3] St. Petersburg Mining University,undefined

来源：

Measurement Techniques | 2017年 / 60卷

关键词：

metallic coatings; thickness; eddy-current thickness gage; thickness standards;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Problems of providing uniformity of measurements of the thickness of metallic coatings by the eddy-current phase method are examined. The physical principles of the method as well as the design and metrological characteristics of the measuring instruments are analyzed. The dependences of the error of measuring the thickness of metallic coatings on the influencing parameters during graduation, verification, and calibration are obtained. The requirements imposed on the electrophysical parameters of metallic coating thickness standards are formulated.

引用

页码：552 / 557

页数：5

共 39 条

[21] Thickness and conductivity of metallic layers from pulsed eddy current measurements
Tai, CC
Rose, JH
Moulder, JC
REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 15A AND 15B, 1996, 15 : 409 - 416
[22] Edge Effects of an Eddy-Current Thickness Sensor During Chemical Mechanical Polishing
Wang, Chengxin
Wang, Tongqin
Tian, Fangxin
Lu, Xinchun
IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, 2022, 35 (01) : 24 - 31
[23] Multiparameter Eddy-Current Sensor Design for Conductivity Estimation and Simultaneous Distance and Thickness Measurements
Lee, Kok-Meng
Hao, Bingjie
Li, Min
Bai, Kun
IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, 2019, 15 (03) : 1647 - 1657
[24] Improvement of the Accuracy of Eddy-Current Testing of the Electric Conductivity of Materials and the Thickness of Dielectric Coatings of the Shells
A. Ya. Teterko
V. M. Uchanin
V. I. Hutnyk
Materials Science, 2014, 49 : 857 - 865
[25] Improvement of the Accuracy of Eddy-Current Testing of the Electric Conductivity of Materials and the Thickness of Dielectric Coatings of the Shells
Teterko, A. Ya.
Uchanin, V. M.
Hutnyk, V. I.
MATERIALS SCIENCE, 2014, 49 (06) : 857 - 865
[26] Assurance of the reliability of results of measurements of the thickness of metallic coatings performed by means of magnetic and eddy current methods in a machine shop
V. A. Syasko
A. E. Ivkin
Measurement Techniques, 2011, 54 : 275 - 280
[27] A Thickness Measurement System for Metal Films Based on Eddy-Current Method With Phase Detection
Li, Wei
Ye, Yang
Zhang, Kang
Feng, Zhihua
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2017, 64 (05) : 3940 - 3949
[28] ASSURANCE OF THE RELIABILITY OF RESULTS OF MEASUREMENTS OF THE THICKNESS OF METALLIC COATINGS PERFORMED BY MEANS OF MAGNETIC AND EDDY CURRENT METHODS IN A MACHINE SHOP
Syasko, V. A.
Ivkin, A. E.
MEASUREMENT TECHNIQUES, 2011, 54 (03) : 275 - 280
[29] A comparative study of eddy-current phase and eddy-current frequency methods of thickness measurement of electrically conductive non-ferromagnetic coatings on electrically conductive non-ferromagnetic substrates
Syasko, Vladimir A.
Ivkin, Anton E.
Pilatova, Irina V.
NON-DESTRUCTIVE TESTING CONFERENCE 2010 (NDT 2010), 2010, : 369 - 379
[30] MODEL-BASED INVERSION OF PLATE THICKNESS AND LIFTOFF FROM EDDY-CURRENT PROBE COIL MEASUREMENTS
BALTZERSEN, O
MATERIALS EVALUATION, 1993, 51 (01) : 72 - 76

← 1 2 3 4 →