Parametric study of macrosegregation in the horizontal strip casting process for different cooling rates and different casting speeds

被引：0
|
作者：
A. V. Kuznetsov
机构：
[1] Department of Mechanical and Aerospace Engineering North Carolina State University,
[2] Campus Box 7910,undefined
[3] Raleigh,undefined
[4] NC 27695-7910,undefined
[5] USA,undefined
来源：
Heat and Mass Transfer | 1999年 / 35卷
关键词：
Mathematical Model; Cool Rate; Fluid Flow; Parametric Study; Casting Process;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The objective of this paper is to investigate sensitivity of the macrosegregation profiles in steel strips produced by the horizontal strip casting process to the major technological parameters controlling this process, such as the cooling rate and the casting speed. To perform this investigation, a mathematical model which accounts for fluid flow as well as for heat and solute transport is suggested. Extensive numerical simulations of the horizontal strip casting process for different cooling rates and different casting speeds are carried out.
引用
收藏
页码：197 / 203
页数：6
相关论文
共 50 条
  • [41] Microstructures in Centrifugal Casting of SiCp/AlSi9Mg Composites with Different Mould Rotation Speeds
    Wang Kai
    Sun Wenju
    Li Bo
    Xue Hansong
    Liu Changming
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2011, 26 (03): : 504 - 509
  • [42] Combination of Different Numerical Methods for Efficient Thermal Stress Analysis of Casting Process
    Kwak, Si Young
    Lim, Chae Ho
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2010, 34 (08) : 1051 - 1057
  • [43] Effect of Sb Addition on the Al-Si Eutectic of Hypoeutectic Al-Si Casting Alloys under Different Cooling Rates
    Yan, Han
    Zhu, Congcong
    Wu, Zhen
    Gao, Wenli
    MATERIALS TRANSACTIONS, 2020, 61 (01) : 181 - 187
  • [44] Numerical simulation of continuous casting process of different steel grades considering solidification and mixing of different steel grades
    Jeong, Myunggeun
    Choi, Changyoung
    Ha, Man Yeong
    Kim, Sung Jool
    Park, Joong Kil
    Oh, Kyung Shik
    METALS AND MATERIALS INTERNATIONAL, 2015, 21 (02) : 303 - 310
  • [45] Numerical simulation of continuous casting process of different steel grades considering solidification and mixing of different steel grades
    Myunggeun Jeong
    Changyoung Choi
    Man Yeong Ha
    Sung Jool Kim
    Joong Kil Park
    Kyung Shik Oh
    Metals and Materials International, 2015, 21 : 303 - 310
  • [46] Study on flow morphology of metal liquid in vacuum different pressure casting
    Dong, Xuan-Pu
    Huang, Nai-Yu
    Wu, Shu-Sen
    Zhuzao/Foundry, 2002, 51 (07):
  • [47] Parametric Optimization for Producing Semi-Solid A383 Alloy using Cooling Slope Casting Process
    Rao M.S.
    Khandelwal H.
    Kumar M.
    Kumar A.
    Archives of Foundry Engineering, 2023, 23 (01) : 43 - 52
  • [48] A Preliminary Study Upon the Applicability of the Direct Water Cooling with the Lost Foam Casting Process
    Acar, Serhat
    Guler, Kerem Altug
    INTERNATIONAL JOURNAL OF METALCASTING, 2021, 15 (01) : 88 - 97
  • [49] A Preliminary Study Upon the Applicability of the Direct Water Cooling with the Lost Foam Casting Process
    Serhat Acar
    Kerem Altug Guler
    International Journal of Metalcasting, 2021, 15 : 88 - 97
  • [50] Modeling effect of cooling conditions on solidification process during thermal cycle of rollers in twin-roll strip casting
    Chun-feng Bai
    Bo Wang
    Jie Ma
    Jie-yu Zhang
    Wan-ping Pan
    Journal of Iron and Steel Research International, 2023, 30 : 64 - 73
12345