Parametric study of macrosegregation in the horizontal strip casting process for different cooling rates and different casting speeds

被引：0
|
作者：
A. V. Kuznetsov
机构：
[1] Department of Mechanical and Aerospace Engineering North Carolina State University,
[2] Campus Box 7910,undefined
[3] Raleigh,undefined
[4] NC 27695-7910,undefined
[5] USA,undefined
来源：
Heat and Mass Transfer | 1999年 / 35卷
关键词：
Mathematical Model; Cool Rate; Fluid Flow; Parametric Study; Casting Process;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The objective of this paper is to investigate sensitivity of the macrosegregation profiles in steel strips produced by the horizontal strip casting process to the major technological parameters controlling this process, such as the cooling rate and the casting speed. To perform this investigation, a mathematical model which accounts for fluid flow as well as for heat and solute transport is suggested. Extensive numerical simulations of the horizontal strip casting process for different cooling rates and different casting speeds are carried out.
引用
收藏
页码：197 / 203
页数：6
相关论文
共 50 条
  • [31] Experimental Study on Horizontal Continuous Casting of 6061 Aluminium Alloy Bar Process
    Wang, Xiangjie
    Zhang, Jiao
    Huang, Yunpeng
    Zhao, Zhihao
    Cui, Jianzhong
    MATERIALS ENGINEERING FOR ADVANCED TECHNOLOGIES, PTS 1 AND 2, 2011, 480-481 : 100 - 103
  • [32] High Strength Ductile Iron Produced by Engineered Cooling: Application for Different Casting Processes
    Lekakh, S.
    Hrebec, B.
    Scott, R.
    Schlobohm, J.
    TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY, VOL 124, 2016, 124 : 221 - 235
  • [33] COMPARISON OF DIFFERENT COOLING ARRANGEMENTS IN THE CONTINUOUS-CASTING OF A SQUARE-SECTION INGOT
    SOBOLEV, VV
    FEDCHENKO, AI
    TREFILOV, PM
    RUSSIAN METALLURGY, 1980, (03): : 87 - 95
  • [34] Thermal operation of molds in continuous-casting machines with cooling channels of different shape
    Yachikov I.M.
    Larina T.P.
    Vdovin K.N.
    Steel in Translation, 2007, 37 (11) : 929 - 933
  • [35] Numerical simulation of aluminum-steel clad strip production using horizontal single belt casting process
    Khakzad, Shiva
    Seyedein, Seyed Hossein
    Aboutalebi, Mohammad Reza
    Khakzad, Sheida
    MATERIALS TODAY COMMUNICATIONS, 2024, 40
  • [36] Solidification structure of low carbon steel strips with different phosphorus contents produced by strip casting
    Li, Na
    Liu, Zhenyu
    Qiu, Yiqing
    Lin, Zhaosen
    Liu, Xianghua
    Wang, Guodong
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2006, 22 (06) : 755 - 758
  • [37] Solidification structure of low carbon steel strips with different phosphorus contents produced by strip casting
    State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China
    J Mater Sci Technol, 2006, 6 (755-758):
  • [38] Solidification Structure of Low Carbon Steel Strips with Different Phosphorus Contents Produced by Strip Casting
    Na LI
    JournalofMaterialsScience&Technology, 2006, (06) : 755 - 758
  • [39] Microstructures in Centrifugal Casting of SiCp/AlSi9Mg Composites with Different Mould Rotation Speeds
    王开
    Journal of Wuhan University of Technology(Materials Science), 2011, 26 (03) : 504 - 509
  • [40] Microstructures in centrifugal casting of SiCp/AlSi9Mg composites with different mould rotation speeds
    Kai Wang
    Wenju Sun
    Bo Li
    Hansong Xue
    Changming Liu
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2011, 26 : 504 - 509
12345