Lead-Free Bumping Using an Alternating Electromagnetic Field

A novel lead-free bumping technique using an alternating electromagnetic field (AEF) was investigated. Lead-free solder bumps reflowed onto copper pads through AEF have been achieved. A comparison was conducted between the microstructures of the lead-free solder joints formed by the conventional thermal reflow and AEF reflow. Keeping the substrate temperature lower than that of the solder bumps, AEF reflow successfully created metallurgical bonding between the lead-free solders and metallizations through an interfacial intermetallic compound (IMC). The AEF reflow could be finished in several seconds, much faster than the conventional hot-air reflow. Considering the morphology of the interfacial Cu6Sn5 IMC, a shorter heating time above the melting point would be a better choice for solder joint reliability. The results show that AEF reflow is a promising localized heating soldering technique in electronic packaging.