A Fault-Tolerant Switching-Table-Based DTC for Five-Phase Induction Motor

被引：1

作者：

Panigrahi B.P. ^{[1
]}

Mahanta U. ^{[1
]}

Panda A.K. ^{[2
]}

机构：

[1] Department of Electrical Engineering, Indira Gandhi Institute of Technology, Sarang, Dhenkanal, 759146, Odisha

[2] Department of Electrical Engineering, NIT Rourkela, Rourkela, 769008, Odisha

来源：

Journal of The Institution of Engineers (India): Series B | 2019年 / 100卷 / 04期

关键词：

Fault-tolerant drive; Five-phase induction motor; Open phase winding; ST-DTC;

D O I：

10.1007/s40031-019-00385-0

中图分类号：

学科分类号：

摘要：

Multiphase induction drive is gaining popularity in last decade because of reliability, less harmonics and fault-tolerant capability. In the present work, a five-phase induction motor is modelled from dynamic mathematical equation using MATLAB/Simulink. The switching-table-based DTC with one phase open is simulated to know its fault-tolerant capability and reliability. The faulty machine model is run for full load, 4/5th rated load and half of the rated load, and results are compared with a healthy five-phase induction motor. The results show that the motor becomes unstable for full load; however, it is capable of taking 4/5th of the rated torque of a healthy motor. The transient behaviour during variation of load is also comparable with a healthy five-phase induction motor. © 2019, The Institution of Engineers (India).

引用

页码：287 / 293

页数：6

共 50 条

[1] Natural Fault-tolerant Switching-table-based DTC for Five-phase PMSM
Zhou, Huawei
Chen, Cheng
Zhao, Yuheng
Jiang, Guangyao
Zhang, Duo
[J]. Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2024, 44 (04): : 1618 - 1628
[2] Switching-Table-Based Diagnosis-Free Fault-Tolerant DTC for Five-Phase PMSM With Any Phase Open-Circuit Fault
Zhou, Huawei
Chen, Cheng
Xiang, Xiaolong
Liu, Guohai
[J]. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2024,
[3] Novel Switching-table Based Fault Tolerant DTC For Five-phase PMSM
Liu, Guohai
Cao, Yanlin
Zhou, Huawei
Xu, Jinhui
[J]. Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2021, 41 (18): : 6399 - 6407
[4] Fault-Tolerant DTC Technique for an Inverter-Fed Five-Phase Induction Motor Drive with an Open-Phase Fault
Chikondra, Bheemaiah
Muduli, Utkal Ranjan
Behera, Ranjan Kumar
[J]. 2019 21ST EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS (EPE '19 ECCE EUROPE), 2019,
[5] Fault-Tolerant Control of Five-Phase Induction Motor Based on Rotor Field Orientation
Zhang, Chengsheng
Shi, Manhong
Zhao, Hongtao
[J]. 2021 4TH INTERNATIONAL CONFERENCE ON ROBOTICS, CONTROL AND AUTOMATION ENGINEERING (RCAE 2021), 2021, : 351 - 355
[6] Flux-modification-based Fault-tolerant DTC for Five-phase PMSM
Liu, Guohai
Gao, Menghu
Zhou, Huawei
Zhou, Cheng
[J]. Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2019, 39 (02): : 359 - 365
[7] An Improved Open-Phase Fault-Tolerant DTC Technique for Five-Phase Induction Motor Drive Based on Virtual Vectors Assessment
Chikondra, Bheemaiah
Muduli, Utkal Ranjan
Behera, Ranjan Kumar
[J]. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2021, 68 (06) : 4598 - 4609
[8] Fault Detection and Fault-Tolerant Operation of a Five-Phase Induction Motor Driving System
Shin, Hye-Ung
Baek, Seung Koo
Lee, Kyo-Beum
[J]. 2016 IEEE 8TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE (IPEMC-ECCE ASIA), 2016,
[9] Fault-Tolerant Current Predictive Control of Five-Phase Induction Motor Drives with an Open Phase
Guzman, H.
Duran, M. J.
Barrero, F.
Toral, S.
[J]. IECON 2011: 37TH ANNUAL CONFERENCE ON IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2011, : 3680 - 3685
[10] Investigation of the Properties of a Five-Phase Induction Motor in the Introduction of New Fault-Tolerant Control
Kellner, Jakub
Kascak, Slavomir
Ferkova, Zelmira
[J]. APPLIED SCIENCES-BASEL, 2022, 12 (04):

← 1 2 3 4 5 →