Degradation of malachite green by g-C3N4-modified magnetic attapulgite composites under visible-light conditions

Water resources are seriously threatened by dye wastewater, and the removal of the dye molecules from the wastewater has garnered considerable interest. People have favored photocatalytic technology in recent years for the treatment of dye wastewater. In this work, attapulgite (ATP) was used as a carrier, Fe3O4 and g-C3N4 were grafted onto ATP, and the surface was then modified with polyethyleneimine (PEI) to produce photocatalyst ATP-Fe3O4-g-C3N4-PEI, which was used in Malachite green (MG) dye wastewater. The structure and surface properties of the composites were analyzed and characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray spectrum (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Uv–vis spectrum analysis, zeta potential measurement, and vibrating-sample magnetometry (VSM) analysis. The removal performance of ATP-Fe3O4-gC3N4-PEI for MG was studied, and the removal mechanism was explored and revealed. It has been shown that the heterojunction formed by Fe3O4 and g-C3N4 can inhibit the compounding of photogenerated electrons and holes, effectively improving the performance of the ATP-Fe3O4-g-C3N4-PEI. Electron paramagnetic resonance (EPR) analysis confirmed that ATP-Fe3O4-g-C3N4-PEI could generate hydroxyl radicals (·OH) and superoxide radicals (·O2-) to degrade the MG. It was believed that ATP-Fe3O4-g-C3N4-PEI could generate hydroxyl radicals (·OH) through the photocatalysis and the Fenton reaction of the composite materials. Under the action of H+, ·O2-, and ·OH, the removal rate of MG by ATP-Fe3O4-g-C3N4-PEI exceeded 98 % at an optimal condition. The intermediate products and degradation pathways of MG degradation were also inferred by LC-MS analysis. These results showed that the prepared photocatalyst has excellent degradation performance for MG and could be used in dye wastewater treatment.