Frequency jumps on BVA & other precision quartz crystal resonators and burst-noise on overtone mode high-frequency quartz crystal resonators .2.

This paper is an extension to earlier paper by the present authors. In this paper recently classified intermittent and discrete frequency jump phenomena will be briefly reviewed and currently not well understood abrupt frequency jump phenomena will be analysed and discussed in detail. These abrupt frequency jumps are caused due to minute and subtle manufacturing imperfections within the precision resonators. Although abrupt jumps actually originate in the precision resonators, non-optimum oscillator circuit can exaggerate the problem even harder. Burst - Noise observed on the high-frequency overtone-mode quartz crystal resonator is also currently not understood. This phenomenon can also be attributed to subtle and minute manufacturing imperfections within the resonators. Two suggestions will be put forward to minimise burst - noise on the high-frequency overtone-mode quartz crystal resonators. Then it will be postulated that to minimise abrupt frequency jumps on the precision AT- and SC- cut resonators a new resonator package other than HC - 36 / U (or HC - 27 / U) and HC - 40 / U (or near equivalent glass package) will be required. Two new possible packages will be proposed. Finally a number of actions taken to minimise abrupt frequency jumps on 5MHz third-overtone mode SC-cut BVA resonator will be detailed.