Analytical Modeling of Shear Band Spacing of Serrated Chip in High Speed Cutting of Aluminum Alloys

被引：1
|
作者：
Jiang, Xudong [1 ]
Wang, Yiqiang [1 ]
机构：
[1] Jilin Univ, Mech Sci & Engn Coll, Changchun, Peoples R China
来源：
E-ENGINEERING & DIGITAL ENTERPRISE TECHNOLOGY VII, PTS 1 AND 2 | 2009年 / 16-19卷
关键词：
Shear band spacing; Analytical modeling; Serrated chip; High speed cutting; FLOW; ZONE;
D O I：
10.4028/www.scientific.net/AMM.16-19.612
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Based on Oxley s predictive model, the novel analytical modeling of shear band spacing of serrated chip in high speed cutting of aluminum alloys is investigated accounting for the effect of strain rate hardening in addition to temperature softening. It is indicated that the shear band spacing decreases with increasing the cutting velocity and increases with increasing undeformed chip thickness. Other than the cutting velocity and undeformed chip thickness, the shear band spacing initially descends to minimum and subsequently ascends with increasing the tool rake angle.
引用
收藏
页码：612 / 617
页数：6
相关论文
共 50 条
  • [1] Analytical modeling of adiabatic shear band spacing for serrated chip in high-speed machining
    Yang, Qibiao
    Liu, Zhanqiang
    Shi, Zhenyu
    Wang, Bing
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 71 (9-12): : 1901 - 1908
  • [2] Analytical modeling of adiabatic shear band spacing for serrated chip in high-speed machining
    Qibiao Yang
    Zhanqiang Liu
    Zhenyu Shi
    Bing Wang
    The International Journal of Advanced Manufacturing Technology, 2014, 71 : 1901 - 1908
  • [3] Experimental Study of Serrated Chip in High Speed Cutting
    Li, Guohe
    Qi, Houjun
    Yan, Bing
    HIGH SPEED MACHINING V, 2012, 723 : 99 - 104
  • [4] EFFECT OF CUTTING CONDITIONS ON THE SERRATED CHIP FORMATION IN HIGH-SPEED CUTTING
    Gao, Chongyang
    Zhang, Liangchi
    MACHINING SCIENCE AND TECHNOLOGY, 2013, 17 (01) : 26 - 40
  • [5] Critical cutting speed for onset of serrated chip flow in high speed machining
    Ye, G. G.
    Chen, Y.
    Xue, S. F.
    Dai, L. H.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2014, 86 : 18 - 33
  • [6] Ductile Fracture due to Adiabatic Shear during the Serrated Chip Formation in High Speed Cutting: A Microscopic Investigation
    Duan, C. Z.
    Zhang, L. C.
    Li, H. H.
    Wang, M. J.
    MATERIALS, MECHATRONICS AND AUTOMATION, PTS 1-3, 2011, 467-469 : 181 - +
  • [7] Modeling of serrated chip formation in high speed orthogonal machining
    Park, Hyung Wook
    Rhim, Sung-Han
    Oh, Soo-Ik
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2008, 22 (9-11): : 1666 - 1671
  • [8] A calculational model of shear strain and strain rate within shear band in a serrated chip formed during high speed machining
    Duan, C. Z.
    Wang, M. J.
    Pang, J. Z.
    Li, G. H.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 178 (1-3) : 274 - 277
  • [9] Study on Serrated Chip Formation of Aluminum Alloy 7050-T7451 in Ultra-high-Speed Cutting
    Wang, Shuai
    Pan, Yongzhi
    Zhang, Zewen
    Shi, Qihang
    Chen, Liwen
    Fu, Xiuli
    ICMAE 2020: 2020 11TH INTERNATIONAL CONFERENCE ON MECHANICAL AND AEROSPACE ENGINEERING, 2020, : 13 - 17
  • [10] Finite element simulation of the formation process of a serrated chip in high-speed cutting
    Duan, Chunzheng
    Wang, Zhaoxi
    Li, Honghua
    Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University, 2014, 35 (02): : 226 - 232
12345