Simulation model for a novel superconducting fault current limiter

被引：3

作者：

Stemmle, M. ^{[1
]}

Oswald, B. R. ^{[1
]}

Breuer, F. ^{[2
]}

Elschner, S. ^{[3
]}

Noe, M. ^{[4
]}

机构：

[1] Leibniz Univ Hannover, Welfengarten 1, D-30167 Hannover, Germany

[2] Nexans SuperCond GmbH, D-50351 Hurth, Germany

[3] FH Mannheim, D-68163 Mannheim, Germany

[4] Forschungszentrum Karlsruhe, D-76021 Karlsruhe, Germany

来源：

7TH EUROPEAN CONFERENCE ON APPLIED SUPERCONDUCTIVITY (EUCAS'05) | 2006年 / 43卷

关键词：

D O I：

10.1088/1742-6596/43/1/233

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

A simulation model for a novel superconducting fault current limiter is presented. The components of the novel fault current limiter are melt cast processed BSCCO 2212 tubes with shunt coils wound around them, which are connected in parallel. The simulation model is based on the electrical and thermal equivalent circuits of a component. A corresponding system of state space differential equations describes these equivalent circuits, which are coupled through several variables. MATLAB is used to solve the state space differential equation system, incorporating the material properties of the bulk BSCCO 2212 as well as the copper coil. Through a comparison of the simulation results and measured data the introduced model is validated. With the simulation model, the design of the components for a fault current limiter can be further improved.

引用

页码：954 / 957

页数：4

共 50 条

[31] Superconducting fault current limiter for railway transport
L. M. Fisher
D. F. Alferov
M. R. Akhmetgareev
A. I. Budovskii
D. V. Evsin
I. F. Voloshin
A. V. Kalinov
Physics of Atomic Nuclei, 2015, 78 : 1654 - 1657
[32] Superconducting fault current limiter with bulk materials
Tixador, P
Buzon, D
Floch, E
Porcar, L
Isfort, D
Chaud, X
Tournier, R
Bourgault, D
Barbut, JM
Bach, J
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2002, 378 : 815 - 822
[33] Simulation Study of a New Bridge-type Superconducting Fault Current Limiter
Ma, Youjie
Wang, Hui
Zhou, Xuesong
Gong, Juan
Yin, Xiangqian
PROCEEDINGS OF FIRST INTERNATIONAL CONFERENCE OF MODELLING AND SIMULATION, VOL V: MODELLING AND SIMULATION IN MECHANICS AND MANUFACTURE, 2008, : 163 - 166
[34] Simulation of a DC Superconducting Fault Current Limiter for the Design of Online Monitoring System
Pan Jiajun
Tan, Yaxiong
Sheng, Chao
Xiao, Leishi
Li, Jian
Chen, Weigen
2018 IEEE INTERNATIONAL CONFERENCE ON HIGH VOLTAGE ENGINEERING AND APPLICATION (ICHVE), 2018,
[35] Superconducting Cable and Superconducting Fault Current Limiter at Puji Substation
Xin, Y.
Hui, H.
Gong, W. Z.
Wang, J. Z.
Tian, B.
Ren, A. L.
Ye, F.
Zi, M. R.
2009 INTERNATIONAL CONFERENCE ON APPLIED SUPERCONDUCTIVITY AND ELECTROMAGNETIC DEVICES, 2009, : 388 - +
[36] Application of a Novel Superconducting Fault Current Limiter in a VSC-HVDC System
Zhang, Lihui
Shi, Jing
Wang, Zuoshuai
Tang, Yuejin
Yang, Zhangwei
Ren, Li
Yan, Sinian
Liao, Yuxiang
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2017, 27 (04)
[37] Current Limiting Characteristics of a Novel Flux-Coupling Type Superconducting Fault Current Limiter
Chen, Lei
Tang, Yuejin
Li, Zhi
Ren, Li
Shi, Jing
Cheng, Shijie
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2010, 20 (03) : 1139 - 1142
[38] Development of an inductive high-Tc superconducting fault current limiter model
Zannella, S
Arienti, A
Giunchi, G
Jansak, L
Majoros, M
Ottoboni, V
APPLIED SUPERCONDUCTIVITY 1997, VOLS 1 AND 2: VOL 1: SMALL SCALE AND ELECTRONIC APPLICATIONS; VOL 2: LARGE SCALE AND POWER APPLICATIONS, 1997, (158): : 1239 - 1242
[39] Transient simulation and analysis for saturated core high temperature superconducting fault current limiter
Zhao, Cuixia
Wang, Shuhong
Qiu, Jie
Zhu, Jian Guo
Guo, Youguang
Gong, Weizhi
Cao, Zhengjian
IEEE TRANSACTIONS ON MAGNETICS, 2007, 43 (04) : 1813 - 1816
[40] High aspect ratio problem in simulation of a fault current limiter based on superconducting tapes
Velichko, A. V.
Coombs, T. A.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2006, 19 (06): : 629 - 634

← 1 2 3 4 5 →