Effect of soot pigment additive on properties of composite gypsum binder

被引:2
|
作者
Ignatova, O. A. [1 ]
机构
[1] Novosibirsk State Univ Architecture & Civil Engn, Dept Bldg Mat Standardizat & Certificat, 113 Leningradskaya, Novosibirsk 630008, Russia
关键词
D O I
10.1088/1757-899X/451/1/012025
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The results of studies to increase strength and water resistance of gypsum materials due to the hydraulic complex, pozzolanic and ultradispersed additives are presented in the paper. The astringents compositions, consisting of gypsum, cement, microsilica, ultrafine carbon additive of universal pigment concentrate are developed. The average particle size of the carbon black is 150-180 nm. The addition of soot contributes to the hardening processes intensification of the gypsum cement-pozzolanic binder (GCPB) and leads to the formation of a more homogeneous and finely dispersed phase binders' structure. The additive use allowed the authors to improve the mechanical properties of the gypsum cement-pozzolanic binder and to increase the water resistance by the composite compacting structure. The compositions of lightweight concrete and light plaster solutions were developed on the basis of gypsum binder compositions.
引用
收藏
页数:6
相关论文
共 50 条
  • [41] Effect of ceramic-nylon composite fiber content on properties and micromorphologies of gypsum mold
    Huang P.
    Lu G.
    Yan Q.
    Guo Z.
    Yan Y.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2020, 37 (05): : 1167 - 1174
  • [42] Metal Matrix Composite Development Using Binder Jet Additive Manufacturing
    Physical Metallurgy and Materials Design Laboratory, Department of Mechanical Engineering and Materials Science, University of Pittsburgh, 3700 O’Hara Street, Pittsburgh
    PA
    15261, United States
    Miner. Met. Mater. Ser., 2022, (215-223):
  • [43] Behaviour of copper-graphite composite with a binder additive under heating
    Kuz'mina, I.V.
    Rodionov, N.V.
    Rasskazova, E.G.
    Poroshkovaya Metallurgiya, 1994, (3-4): : 62 - 65
  • [44] Metal Matrix Composite Development Using Binder Jet Additive Manufacturing
    Shabani, Mitra
    Xiong, Wei
    METAL-MATRIX COMPOSITES: ADVANCES IN PROCESSING, CHARACTERIZATION, PERFORMANCE AND ANALYSIS, 2022, : 215 - 223
  • [45] Effects of mixing sequence on mechanical properties of graphene oxide and warm mix additive composite modified asphalt binder
    Liu, Kefei
    Zhu, Juncai
    Zhang, Kun
    Wu, Junliang
    Yin, Jian
    Shi, Xianming
    CONSTRUCTION AND BUILDING MATERIALS, 2019, 217 : 301 - 309
  • [46] EFFECT OF A WATER-GYPSUM RATIO ON MECHANICAL PROPERTIES OF GYPSUM
    Tesarek, P.
    Hajkova, A.
    Plachy, T.
    ENGINEERING MECHANICS 2011, 2011, : 615 - 618
  • [47] The Effect of Mineral Wool Fiber Additive on Several Mechanical Properties and Thermal Conductivity in Geopolymer Binder
    Lazniewska-Piekarczyk, Beata
    Smyczek, Dominik
    MATERIALS, 2024, 17 (02)
  • [48] Effect of diamond additive on the properties of cBN composites with Al-Si as binder by HTHP sintering
    Wang, Wenjie
    Li, Zhihong
    Zhu, Yumei
    Zhang, Xiangfa
    Wei, Xing
    CERAMICS INTERNATIONAL, 2022, 48 (19) : 28830 - 28834
  • [49] Effect of a modifying additive on the kinetics and mechanism of the dehydration of phosphoric gypsum
    Astrelin I.M.
    Serbin V.P.
    Ptichnikov A.S.
    Aleiner A.B.
    Theoretical and Experimental Chemistry, 2007, 43 (4) : 267 - 271
  • [50] Relationship between mechanical properties and porosity of water-resistant gypsum binder
    Singh, M
    Garg, M
    CEMENT AND CONCRETE RESEARCH, 1996, 26 (03) : 449 - 456