Effect of soot pigment additive on properties of composite gypsum binder

被引:2
|
作者
Ignatova, O. A. [1 ]
机构
[1] Novosibirsk State Univ Architecture & Civil Engn, Dept Bldg Mat Standardizat & Certificat, 113 Leningradskaya, Novosibirsk 630008, Russia
关键词
D O I
10.1088/1757-899X/451/1/012025
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The results of studies to increase strength and water resistance of gypsum materials due to the hydraulic complex, pozzolanic and ultradispersed additives are presented in the paper. The astringents compositions, consisting of gypsum, cement, microsilica, ultrafine carbon additive of universal pigment concentrate are developed. The average particle size of the carbon black is 150-180 nm. The addition of soot contributes to the hardening processes intensification of the gypsum cement-pozzolanic binder (GCPB) and leads to the formation of a more homogeneous and finely dispersed phase binders' structure. The additive use allowed the authors to improve the mechanical properties of the gypsum cement-pozzolanic binder and to increase the water resistance by the composite compacting structure. The compositions of lightweight concrete and light plaster solutions were developed on the basis of gypsum binder compositions.
引用
收藏
页数:6
相关论文
共 50 条
  • [21] Investigating the properties of a novel organic composite warm mix additive on SBS modified asphalt binder
    Dong, Wenhao
    Ma, Feng
    Fu, Zhen
    Hou, Yingjie
    Dai, Jiasheng
    Zhao, Zedong
    Fang, Renyi
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 444
  • [22] The effect of inkjetted nanoparticles on metal part properties in binder jetting additive manufacturing
    Bai, Yun
    Williams, Christopher B.
    NANOTECHNOLOGY, 2018, 29 (39)
  • [23] Effect of the Properties of Natural Resin Binder in a High Friction Composite Material
    Bernard, S. Stephen
    Jayakumari, L. S.
    POLIMEROS-CIENCIA E TECNOLOGIA, 2014, 24 (02): : 149 - 152
  • [24] WC-Co composite made with doped binder: The effect of binder proportion on microstructure and mechanical properties
    Stanciu, Victor Ioan
    Erauw, J. -P.
    Boilet, Laurent
    Vitry, Veronique
    Delaunois, Fabienne
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2023, 112
  • [25] Study on Effect of The Ternary Composite Retarder on Properties of FGD Gypsum Plaster Material
    Li, Xiaolong
    Li, Guozhong
    Liu, Yuzong
    Su, Dengcheng
    ENGINEERING AND MANUFACTURING TECHNOLOGIES, 2014, 541-542 : 45 - +
  • [26] EFFECT OF A MICROCRYSTALLINE ADDITIVE ON TYPE-IV GYPSUM
    HEDGE, TK
    HEIBILI, AJ
    REISBICK, MH
    JOURNAL OF DENTAL RESEARCH, 1987, 66 : 331 - 331
  • [27] Effect of short oil-length alkyd additive on the properties of coal tar binder
    Abd El-Wahab, H.
    Abd El-Hai, F.
    Abd El-Fattah, M.
    Lin, L.
    PIGMENT & RESIN TECHNOLOGY, 2011, 40 (05) : 305 - 310
  • [28] Effect of Gray Scale Binder Levels on Additive Manufacturing of Porous Scaffolds with Heterogeneous Properties
    Vlasea, Mihaela
    Toyserkani, Ehsan
    Pilliar, Robert
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2015, 12 (01) : 62 - 70
  • [29] Preparation and Properties of a Composite Carbon Foam, as Energy Storage and EMI Shield Additive, for Advanced Cement or Gypsum Boards
    Gioti, Christina
    Vasilopoulos, Konstantinos C.
    Baikousi, Maria
    Ntaflos, Angelos
    Viskadourakis, Zacharias
    Paipetis, Alkiviadis S.
    Salmas, Constantinos E.
    Kenanakis, George
    Karakassides, Michael A.
    JOURNAL OF COMPOSITES SCIENCE, 2024, 8 (07):
  • [30] Impact of Hardening Methods on the Moulding Sand's Properties with Gypsum Binder
    Granat, K.
    Paduchowicz, P.
    Dziedzic, A.
    Jamka, M.
    Bialy, P.
    ARCHIVES OF FOUNDRY ENGINEERING, 2020, 20 (04) : 13 - 17