Improved anticorrosion properties of polyurethane coatings based on high-solids acrylics synthesized in a high pressure reactor

被引：20

作者：

Burja, Klemen ^{[1
]}

Segedin, Urban ^{[2
]}

Skale, Sasa ^{[2
]}

Berce, Peter ^{[2
]}

Sket, Primoz ^{[3
,4
]}

Prosen, Polona ^{[1
]}

Kukanja, Dolores ^{[1
,5
]}

机构：

[1] CO PoliMaT, Ctr Excellence Polymer Mat & Technol, SI-1000 Ljubljana, Slovenia

[2] Cent R&D HELIOS Grp, Helios Domzale Dd, SI-1230 Domzale, Slovenia

[3] Natl Inst Chem, Slovenian NMR Ctr, SI-1001 Ljubljana, Slovenia

[4] EN FIST, Ctr Excellence, SI-1001 Ljubljana, Slovenia

[5] MITOL, Tovarna Lepil Dd, SI-6210 Sezana, Slovenia

来源：

PROGRESS IN ORGANIC COATINGS | 2015年 / 78卷

关键词：

High-solids acrylics; Two-component polyurethanes; Closed pressure reactor polymerization; Model free kinetics; Electrochemical impedance spectroscopy; REACTION-KINETICS; POLYMERIZATION; WATERBORNE; METHACRYLATE; CALORIMETER; IMPEDANCE; ACRYLATE;

D O I：

10.1016/j.porgcoat.2014.08.008

中图分类号：

O69 [应用化学];

学科分类号：

081704 ;

摘要：

High-solids styrene-hydroxyl-acrylic copolymer resins were synthesized in different solvents above their boiling points in a high-pressure reactor and compared to the same resin synthesized at ambient pressure. High-solids acrylics, prepared in a closed high pressure reactor at temperature above solvent's boiling point, have lower molecular weight, narrower molecular weight distribution and consequently a lower viscosity compared to resins with the same chemical composition and content of solids prepared at ambient pressure. Syntheses were monitored calorimetrically and by in situ ATR-FTIR spectroscopy using an RC1e (TM) reaction calorimeter. All synthesized resins were tested in two-component polyurethane metal topcoats. Coatings based on resins synthesized in a pressure reactor cure faster according to Model Free Kinetics studies and display improved anticorrosion properties, determined by electrochemical impedance spectroscopy, when compared to the resin synthesized at ambient pressure. (C) 2014 Elsevier B.V. All rights reserved.

引用

页码：275 / 286

页数：12

共 50 条

[41] ELECTROSTATIC APPLICATION OF WATER-BORNE AND HIGH-SOLIDS COATINGS
WALBERG, AC
PLATING AND SURFACE FINISHING, 1978, 65 (02): : 14 - &
[42] WATER-BORNE AND HIGH-SOLIDS COATINGS INTEREST SKYROCKETS
不详
INDUSTRIAL FINISHING, 1975, 51 (04): : 48 - &
[43] Development and Characterization of Anticorrosion and Antifriction Properties for High Performance Polyurethane/Graphene Composite Coatings
Tsai, Pei-Ying
Chen, Tzu-En
Lee, Yueh-Lien
COATINGS, 2018, 8 (07):
[44] HIGH-PERFORMANCE HIGH SOLIDS BEADED POLYURETHANE COATINGS
CHIANG, CP
CROLL, SG
BIERWAGEN, GP
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1986, 192 : 91 - PMSE
[45] High-solids alkyds resins with improved properties based on styrene allyl alcohol (SAA) resinous polyols
Pourreau, DB
Smyth, SE
JCT COATINGSTECH, 2004, 1 (02) : 40 - 47
[46] WHERE CONVERSION COATINGS FIT IN THE HIGH-SOLIDS WET LOOK
CURRIER, G
WOOD & WOOD PRODUCTS, 1985, 90 (07): : 106 - 108
[47] SILICONE ADDITIVES FOR HIGH-SOLIDS POLYESTER-MELAMINE COATINGS
WAELDE, LR
WILLNER, JH
DU, JW
VYSKOCIL, EJ
JOURNAL OF COATINGS TECHNOLOGY, 1994, 66 (836): : 107 - 112
[48] Cracking of high-solids epoxy coatings on steel structures in The Netherlands
Mater Perform, 5 (46-51):
[49] INDUSTRIAL HIGHER-SOLIDS COATINGS, PRESENT AND FUTURE - A HIGH-SOLIDS SMORGASBORD.
Heitkamp, Al
Larson, Jim
Jones, Frank
High solids coatings, 1980, 5 (04): : 3 - 15
[50] WATER-BORNE AND HIGH-SOLIDS COATINGS SYMPOSIUM .1.
不详
INDUSTRIAL FINISHING, 1976, 52 (04): : 58 - &

← 1 2 3 4 5 →