Improved anticorrosion properties of polyurethane coatings based on high-solids acrylics synthesized in a high pressure reactor

被引：20

作者：

Burja, Klemen ^{[1
]}

Segedin, Urban ^{[2
]}

Skale, Sasa ^{[2
]}

Berce, Peter ^{[2
]}

Sket, Primoz ^{[3
,4
]}

Prosen, Polona ^{[1
]}

Kukanja, Dolores ^{[1
,5
]}

机构：

[1] CO PoliMaT, Ctr Excellence Polymer Mat & Technol, SI-1000 Ljubljana, Slovenia

[2] Cent R&D HELIOS Grp, Helios Domzale Dd, SI-1230 Domzale, Slovenia

[3] Natl Inst Chem, Slovenian NMR Ctr, SI-1001 Ljubljana, Slovenia

[4] EN FIST, Ctr Excellence, SI-1001 Ljubljana, Slovenia

[5] MITOL, Tovarna Lepil Dd, SI-6210 Sezana, Slovenia

来源：

PROGRESS IN ORGANIC COATINGS | 2015年 / 78卷

关键词：

High-solids acrylics; Two-component polyurethanes; Closed pressure reactor polymerization; Model free kinetics; Electrochemical impedance spectroscopy; REACTION-KINETICS; POLYMERIZATION; WATERBORNE; METHACRYLATE; CALORIMETER; IMPEDANCE; ACRYLATE;

D O I：

10.1016/j.porgcoat.2014.08.008

中图分类号：

O69 [应用化学];

学科分类号：

081704 ;

摘要：

High-solids styrene-hydroxyl-acrylic copolymer resins were synthesized in different solvents above their boiling points in a high-pressure reactor and compared to the same resin synthesized at ambient pressure. High-solids acrylics, prepared in a closed high pressure reactor at temperature above solvent's boiling point, have lower molecular weight, narrower molecular weight distribution and consequently a lower viscosity compared to resins with the same chemical composition and content of solids prepared at ambient pressure. Syntheses were monitored calorimetrically and by in situ ATR-FTIR spectroscopy using an RC1e (TM) reaction calorimeter. All synthesized resins were tested in two-component polyurethane metal topcoats. Coatings based on resins synthesized in a pressure reactor cure faster according to Model Free Kinetics studies and display improved anticorrosion properties, determined by electrochemical impedance spectroscopy, when compared to the resin synthesized at ambient pressure. (C) 2014 Elsevier B.V. All rights reserved.

引用

页码：275 / 286

页数：12

共 50 条

[31] HIGH-SOLIDS COATINGS BASED ON REACTIVE ACRYLIC POLYMERS FOR THE PRESSURE-SENSITIVE ADHESIVES INDUSTRY.
Lee, Yu Sun
High solids coatings, 1981, 6 (03): : 11 - 13
[32] High-solids coatings: A brief introduction for industry newcomers
O'Dea, Vaughn
Journal of Protective Coatings and Linings, 2004, 21 (06): : 109 - 113
[33] HIGH-SOLIDS SYNTHETIC LATEX DIRECTLY FROM REACTOR
CHITTENDEN, FD
MCCLEARY, CD
SMITH, HS
INDUSTRIAL AND ENGINEERING CHEMISTRY, 1948, 40 (02): : 337 - 339
[34] Performance Testing of Waterborne Antibacterial and High-Solids Coatings
Clemans, D. L.
Rhoades, S. J.
Kendzorski, J. J.
Xu, Q.
Baghdachi, J.
SMART COATINGS II, 2009, 1002 : 111 - 126
[35] FIGURE POTENTIAL EMISSION REDUCTIONS FOR HIGH-SOLIDS COATINGS
NIEMI, B
INDUSTRIAL FINISHING, 1979, 55 (11): : 45 - 45
[36] NEW VINYL-RESIN FOR HIGH-SOLIDS COATINGS
KAUFMAN, LG
GINSBERG, T
MODERN PAINT AND COATINGS, 1983, 73 (02): : 55 - &
[37] High-solids epoxy systems for protective and marine coatings
Totev, Daniel
Rufo, Marcelo
Journal of Protective Coatings and Linings, 2014, 31 (02): : 50 - 60
[38] Calcium sulfonate-based rheology control additives for high-solids coatings
Stephanadis, Jim
Chemical Engineering World, 1996, 31 (02): : 49 - 52
[39] Cracking of high-solids epoxy coatings on steel structures in the Netherlands
Bijen, J
van Montfort, J
MATERIALS PERFORMANCE, 1999, 38 (05) : 46 - 51
[40] COREACTANT HYDROXYALKYL PHOSPHATE CATALYSTS FOR HYDROXYMELAMINE HIGH-SOLIDS COATINGS
CHATTHA, MS
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 1987, 26 (12) : 2495 - 2497

← 1 2 3 4 5 →