Joint Characteristics of Spot Friction Stir Welded 5052 Al Alloy Sheet

被引：4

作者：

Lee, Chang-Yong ^{[1
]}

Lee, Won-Bae ^{[2
]}

Yeon, Yun-Mo ^{[3
]}

Song, Keun ^{[3
]}

Moon, Jeong-Hoon ^{[3
]}

Kim, Jung-Gu ^{[1
]}

Jung, Seung-Boo ^{[1
]}

机构：

[1] Sungkyunkwan Univ, Sch Adv Mat Sci & Engn, 300 Cheoncheon Dong, Suwon 440746, Gyounggi Do, South Korea

[2] Joining Res Grp, Tech Res Lab, Pohang 790895, South Korea

[3] Suwon Sci Coll, Hwasung 445742, South Korea

来源：

THERMEC 2006 SUPPLEMENT: 5TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS | 2007年 / 15-17卷

关键词：

Spot Friction Stir Welding; 5052 Al alloy; Microstructure; Mechanical properties;

D O I：

10.4028/www.scientific.net/AMR.15-17.345

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The microstructure and mechanical properties of spot friction stir welded A 5052 alloy were investigated with insertion depth of welding tool. As the insertion depth of welding tool increased, the size of stirring zone increased and the thickness of upper sheet decreased. The value of shear load was the lowest at the shallowest insertion depth and increased to the highest value of 3.35 kN at a 1.6mm of insertion depth. An increase in the pin insertion depth beyond 1.6mm did not result in further increase in the lap shear load. Spot friction stir welded joints showed shear fracture mode at shallower insertion depths and fracture mode changed to plug fracture mode as the insertion depth was deeper.

引用

页码：345 / 350

页数：6

共 50 条

[31] Weldability and its improvement of friction welded joint between ductile cast iron and 5052 Al alloy
Kimura, Masaaki
Yoneda, Akira
Kusaka, Masahiro
Kaizu, Koichi
Hayashida, Kazuhiro
Takahashi, Tsuyoshi
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2021, 15 (04):
[32] Microstructural properties and fracture characteristics of friction stir welded joint for 2024 aluminum alloy
Li, J.
Liu, P.
Zhang, Y. B.
Gong, S. L.
Pan, G. H.
KOVOVE MATERIALY-METALLIC MATERIALS, 2015, 53 (03): : 167 - 173
[33] Effects of friction welding conditions on tensile strength of friction welded joint between 5052 Al alloy and pure copper
Kimura, Masaaki
Inui, Yuusuke
Kusaka, Masahiro
Kaizu, Koichi
MECHANICAL ENGINEERING JOURNAL, 2018, 5 (02):
[34] Microstructure characteristics and corrosion behavior of refill friction stir spot welded 7050 aluminum alloy
Zhang, Da
Dong, Jihong
Xiong, Jiangtao
Jiang, Nan
Li, Jinglong
Guo, Wei
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 20 : 1302 - 1314
[35] Microstructure characteristics and corrosion behavior of refill friction stir spot welded 7050 aluminum alloy
Zhang, Da
Dong, Jihong
Xiong, Jiangtao
Jiang, Nan
Li, Jinglong
Guo, Wei
Journal of Materials Research and Technology, 2022, 20 : 1302 - 1314
[36] Influence of surface pretreatment on the bonding mechanism and mechanical properties of AA5052/CFRP friction stir spot welded joint
Li, Jiachen
Dong, Honggang
Tang, Zuyang
Li, Peng
Wu, Baosheng
Ma, Yueting
Huang, Libing
Zhang, Liangliang
Li, Chao
Xiong, Jiangtao
JOURNAL OF MANUFACTURING PROCESSES, 2023, 105 : 112 - 123
[37] Effect of tool insert speed and preheating time on mechanical properties of friction stir welded 5052 aluminum alloy joint
Furuichi, Hideki
Arafuka, Jyunichi
Katoh, Kazuyoshi
Keikinzoku/Journal of Japan Institute of Light Metals, 2013, 63 (09): : 303 - 309
[38] Joint formation in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds
Liyanage, T.
Kilbourne, J.
Gerlich, A. P.
North, T. H.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2009, 14 (06) : 500 - 508
[39] Corrosion behavior of refilled friction stir spot welded joint between aluminum alloy and galvanized steel
Li, Peng
Wang, Yaqiang
Wang, Shuai
Yang, Jiang
Dong, Honggang
Yan, Dejun
MATERIALS RESEARCH EXPRESS, 2018, 5 (09)
[40] Joint Interface Morphology of Friction Stir Spot Welded Aluminum Alloy Sheets and Plated Steel Sheets
Feng, Keyan
Watanabe, Mitsuhiro
Kumai, Shinji
PRICM 7, PTS 1-3, 2010, 654-656 : 970 - +

← 1 2 3 4 5 →