Joint Characteristics of Spot Friction Stir Welded 5052 Al Alloy Sheet

被引：4

作者：

Lee, Chang-Yong ^{[1
]}

Lee, Won-Bae ^{[2
]}

Yeon, Yun-Mo ^{[3
]}

Song, Keun ^{[3
]}

Moon, Jeong-Hoon ^{[3
]}

Kim, Jung-Gu ^{[1
]}

Jung, Seung-Boo ^{[1
]}

机构：

[1] Sungkyunkwan Univ, Sch Adv Mat Sci & Engn, 300 Cheoncheon Dong, Suwon 440746, Gyounggi Do, South Korea

[2] Joining Res Grp, Tech Res Lab, Pohang 790895, South Korea

[3] Suwon Sci Coll, Hwasung 445742, South Korea

来源：

THERMEC 2006 SUPPLEMENT: 5TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS | 2007年 / 15-17卷

关键词：

Spot Friction Stir Welding; 5052 Al alloy; Microstructure; Mechanical properties;

D O I：

10.4028/www.scientific.net/AMR.15-17.345

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The microstructure and mechanical properties of spot friction stir welded A 5052 alloy were investigated with insertion depth of welding tool. As the insertion depth of welding tool increased, the size of stirring zone increased and the thickness of upper sheet decreased. The value of shear load was the lowest at the shallowest insertion depth and increased to the highest value of 3.35 kN at a 1.6mm of insertion depth. An increase in the pin insertion depth beyond 1.6mm did not result in further increase in the lap shear load. Spot friction stir welded joints showed shear fracture mode at shallower insertion depths and fracture mode changed to plug fracture mode as the insertion depth was deeper.

引用

页码：345 / 350

页数：6

共 50 条

[21] The joint characteristics of friction stir welded Mg-Zn-Y alloy
Lee, CY
Lee, WB
Yeon, YM
Jung, SB
PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 555 - 558
[22] Microstructure Characteristics of Refill Friction Stir Spot Welded Multilayered Aluminum Foils Joint
Xie, Yunfei
Ge, Shipeng
Guo, Zhenguo
Chu, Qiang
Zhang, Yong
Li, Wenya
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2024, 60 (18): : 128 - 137
[23] Effect of Preheat Temperature on Friction Stir Welded Aluminum Alloy 5052 Joints
Muhayat, Nurul
Triyono
Kusharjanta, Bambang
Handika, Radian T.
Advance Materials Development and Applied Mechanics, 2014, 597 : 253 - 256
[24] Characteristics of the kissing-bond in friction stir welded Al alloy 1050
Sato, YS
Takauchi, H
Park, SHC
Kokawa, H
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 405 (1-2): : 333 - 338
[25] Effect Of Tool Rotational Speed On Friction Stir Spot Welded Aa5052-H38 Aluminum Alloy
Sekhar, S. Ravi
Chittaranjandas, V.
Govardhan, D.
Karthikeyan, R.
MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 5536 - 5543
[26] JOINT STRENGTH AND ITS IMPROVEMENT OF FRICTION WELDED JOINT BETWEEN DUCTILE CAST IRON AND 5052 AL ALLOY
Kimura, Mmasaaki
Yoneda, Akira
Kusaka, Masahiro
Kaizu, Koichi
Hayashida, Kazuhiro
Takahashi, Tsuyoshi
PROCEEDINGS OF THE JSME 2020 CONFERENCE ON LEADING EDGE MANUFACTURING/MATERIALS AND PROCESSING, LEMP2020, 2020,
[27] Fatigue behavior of friction stir spot welded AZ31 Mg alloy sheet joints
Luo, Tian-jiao
Shi, Bao-liang
Duan, Qi-qiang
Fu, Jun-wei
Yang, Yuan-sheng
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2013, 23 (07) : 1949 - 1956
[28] Effect of Refilling Time on the Microstructure and Mechanical Properties Refill Friction Stir Spot Welded 6082 Al Alloy Butt Joint
Liu Yinghui
Yang Deyun
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2022, 75 (10) : 2673 - 2682
[29] Effect of Refilling Time on the Microstructure and Mechanical Properties Refill Friction Stir Spot Welded 6082 Al Alloy Butt Joint
Liu Yinghui
Yang Deyun
Transactions of the Indian Institute of Metals, 2022, 75 : 2673 - 2682
[30] The joint characteristics of friction stir welded AZ91D magnesium alloy
Lee, WB
Kim, JW
Yeon, YM
Jung, SB
MATERIALS TRANSACTIONS, 2003, 44 (05) : 917 - 923

← 1 2 3 4 5 →