Joint Characteristics of Spot Friction Stir Welded 5052 Al Alloy Sheet

被引：4

作者：

Lee, Chang-Yong ^{[1
]}

Lee, Won-Bae ^{[2
]}

Yeon, Yun-Mo ^{[3
]}

Song, Keun ^{[3
]}

Moon, Jeong-Hoon ^{[3
]}

Kim, Jung-Gu ^{[1
]}

Jung, Seung-Boo ^{[1
]}

机构：

[1] Sungkyunkwan Univ, Sch Adv Mat Sci & Engn, 300 Cheoncheon Dong, Suwon 440746, Gyounggi Do, South Korea

[2] Joining Res Grp, Tech Res Lab, Pohang 790895, South Korea

[3] Suwon Sci Coll, Hwasung 445742, South Korea

来源：

THERMEC 2006 SUPPLEMENT: 5TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS | 2007年 / 15-17卷

关键词：

Spot Friction Stir Welding; 5052 Al alloy; Microstructure; Mechanical properties;

D O I：

10.4028/www.scientific.net/AMR.15-17.345

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The microstructure and mechanical properties of spot friction stir welded A 5052 alloy were investigated with insertion depth of welding tool. As the insertion depth of welding tool increased, the size of stirring zone increased and the thickness of upper sheet decreased. The value of shear load was the lowest at the shallowest insertion depth and increased to the highest value of 3.35 kN at a 1.6mm of insertion depth. An increase in the pin insertion depth beyond 1.6mm did not result in further increase in the lap shear load. Spot friction stir welded joints showed shear fracture mode at shallower insertion depths and fracture mode changed to plug fracture mode as the insertion depth was deeper.

引用

页码：345 / 350

页数：6

共 50 条

[1] Effect of Microstructure on Postweld Formability in Friction Stir Welded Al Alloy 5052
Sato, Y. S.
Sugiura, Y.
Shoji, Y.
Park, S. H. C.
Kokawa, H.
Ikeda, K.
TRENDS IN WELDING RESEARCH, PROCEEDINGS, 2006, : 387 - 391
[2] Post-weld formability of friction stir welded Al alloy 5052
Sato, YS
Sugiura, Y
Shoji, Y
Park, SHC
Kokawa, H
Ikeda, K
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 369 (1-2): : 138 - 143
[3] Microstructures and mechanical properties of friction stir spot welded Al 6061 alloy lap joint welded in air and water
Shekhawat, Ravindra S.
Nadakuduru, Vijay N.
Nagumothu, Kishore B.
MATERIALS TODAY-PROCEEDINGS, 2021, 41 : 995 - 1000
[4] Microstructure and mechanical optimization of probeless friction stir spot welded joint of an Al-Li alloy
Q.Chu
W.Y.Li
X.W.Yang
J.J.Shen
A.Vairis
W.Y.Feng
W.B.Wang
JournalofMaterialsScience&Technology, 2018, 34 (10) : 1739 - 1746
[5] Microstructure and mechanical optimization of probeless friction stir spot welded joint of an Al-Li alloy
Chu, Q.
Li, W. Y.
Yang, X. W.
Shen, J. J.
Vairis, A.
Feng, W. Y.
Wang, W. B.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2018, 34 (10) : 1739 - 1746
[6] Effect of welding parameters on microstructure and mechanical properties of friction stir spot welded 5052 aluminum alloy
Zhang, Zhaohua
Yang, Xinqi
Zhang, Jialong
Zhou, Guang
Xu, Xiaodong
Zou, Binlian
MATERIALS & DESIGN, 2011, 32 (8-9): : 4461 - 4470
[7] The weld interface for friction spot welded 5052 aluminium alloy
M. D. Tier
T. S. Rosendo
J. A. Mazzaferro
C. P. Mazzaferro
J. F. dos Santos
T. R. Strohaecker
The International Journal of Advanced Manufacturing Technology, 2017, 90 : 267 - 276
[8] The weld interface for friction spot welded 5052 aluminium alloy
Tier, M. D.
Rosendo, T. S.
Mazzaferro, J. A.
Mazzaferro, C. P.
dos Santos, J. F.
Strohaecker, T. R.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 90 (1-4): : 267 - 276
[9] Fracture Behaviour of Friction Stir Spot Welded Joint
Mourad, Abdel-Hamid I.
Harib, Khalifa H.
El-Domiaty, Aly
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2010, VOL 6, PTS A AND B, 2010, : 205 - 215
[10] Microstructure and microtextural studies of friction stir welded aluminium alloy 5052
Kumbhar, N. T.
Sahoo, S. K.
Samajdar, I.
Dey, G. K.
Bhanumurthy, K.
MATERIALS & DESIGN, 2011, 32 (03) : 1657 - 1666

← 1 2 3 4 5 →