Formability of Automotive H240LA Steel Sheets in Stretch-Bending Processes

被引：6

作者：

Martinez-Palmeth, L. H. ^{[1
]}

Martinez-Donaire, A. J. ^{[1
]}

Centeno, G. ^{[1
]}

Garcia-Lomas, F. J. ^{[1
]}

Vallellano, C. ^{[1
]}

机构：

[1] Univ Seville, Dept Mech & Mat Engn, Escuela Tecn Super Ingn, Seville 41092, Spain

来源：

MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE, (MESIC 2013) | 2013年 / 63卷

关键词：

Sheet metal forming; H240LA; Stretch-Bending; Necking; Ductile Fracture; NECKING; LIMITS;

D O I：

10.1016/j.proeng.2013.08.205

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper discusses the influence of punch radius on the formability of 1.2 mm thick H240LA steel sheets. A series of Nakazima tests with hemispherical punch and stretch-bending tests with cylindrical punches of variable diameter were performed in order to assess the influence of the strain gradient on sheet failure. Necking limit strains were obtained by using a recently reported time-dependent methodology that can be used not only in conventional Marciniak and Nakazima tests, but also in the presence of a severe strain gradient across the sheet thickness. Based on the results, formability in H240LA steel sheets increases with decreasing t0/R ratio. Fracture limit strains in both test series were evaluated by using an optical strain measurement system and measuring specimen thickness after fracture. (C) 2013 The Authors. Published by Elsevier Ltd.

引用

页码：669 / 677

页数：9

共 50 条

[41] Optimization of Surface Preparation and Painting Processes for Railway and Automotive Steel Sheets
Szalai, Szabolcs
Szivos, Brigitta Fruzsina
Kurhan, Dmytro
Nemeth, Attila
Sysyn, Mykola
Fischer, Szabolcs
INFRASTRUCTURES, 2023, 8 (02)
[42] FEM supported optimization of bending processes for vibration damping steel sheets
vonFinckenstein, E
Kessler, L
Steininger, V
STEEL RESEARCH, 1996, 67 (09): : 364 - 368
[43] NUMERICAL SIMULATION OF BENDING PROCESS FOR STEEL SHEETS USED IN AUTOMOTIVE INDUSTRY WITH EMPHASIS ON SPRINGBACK
Mulidran, Peter
Spisak, Emil
Tomas, Miroslav
Majernikova, Janka
Rohal, Vladimir
ACTA METALLURGICA SLOVACA, 2024, 30 (01): : 41 - 46
[44] Development of New Ferritic Stainless Steel Sheets with Excellent Heat Resistance and Formability for Automotive Exhaust Manifolds
Hamada, J. -I.
Kanno, N.
Hayashi, A.
Hiraide, N.
Abe, M.
Nishimura, K.
Takushima, C.
Yakawa, A.
Fudanoki, F.
METALLURGIA ITALIANA, 2018, (05): : 33 - 39
[45] Theoretical predictions of fracture and springback for high tensile strength steel sheets under stretch bending
Uemori, Takeshi
Naka, Tetsuo
Tada, Naoya
Yoshimura, Hidenori
Katahira, Takashi
Yoshida, Fusahito
INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017, 2017, 207 : 1606 - 1610
[46] Videoextensometric measuring of deformation processes in automotive steel sheets at two strain rate levels
Mihalikova, M.
Ambrisko, L'.
Pesek, L.
KOVOVE MATERIALY-METALLIC MATERIALS, 2011, 49 (02): : 137 - 141
[47] Effects of microstructure on stretch-flange-formability of 980 MPa grade cold-rolled ultra high strength steel sheets
Hasegawa, K
Kawamura, K
Urabe, T
Hosoya, Y
ISIJ INTERNATIONAL, 2004, 44 (03) : 603 - 609
[48] On the Effect of Q&P Processing on the Stretch-flange-formability of 0.2C Ultra-high Strength Steel Sheets
Huyghe, Pierre
Depinoy, Sylvain
Caruso, Matteo
Mercier, David
Georges, Cedric
Malet, Loic
Godet, Stephane
ISIJ INTERNATIONAL, 2018, 58 (07) : 1341 - 1350
[49] Formability Assessment of Prestrained Automotive Grade Steel Sheets Using Stress Based and Polar Effective Plastic Strain-Forming Limit Diagram
Basak, S.
Panda, S. K.
Zhou, Y. N.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2015, 137 (04):
[50] Effect of Powder Particle Size on the Mechanical Properties of Boronized EN H320 LA Steel Sheets
Calik, Adnan
ISIJ INTERNATIONAL, 2013, 53 (01) : 160 - 164

← 1 2 3 4 5 →