Formability of Automotive H240LA Steel Sheets in Stretch-Bending Processes

被引：6
|
作者：
Martinez-Palmeth, L. H. [1 ]
Martinez-Donaire, A. J. [1 ]
Centeno, G. [1 ]
Garcia-Lomas, F. J. [1 ]
Vallellano, C. [1 ]
机构：
[1] Univ Seville, Dept Mech & Mat Engn, Escuela Tecn Super Ingn, Seville 41092, Spain
来源：
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE, (MESIC 2013) | 2013年 / 63卷
关键词：
Sheet metal forming; H240LA; Stretch-Bending; Necking; Ductile Fracture; NECKING; LIMITS;
D O I：
10.1016/j.proeng.2013.08.205
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper discusses the influence of punch radius on the formability of 1.2 mm thick H240LA steel sheets. A series of Nakazima tests with hemispherical punch and stretch-bending tests with cylindrical punches of variable diameter were performed in order to assess the influence of the strain gradient on sheet failure. Necking limit strains were obtained by using a recently reported time-dependent methodology that can be used not only in conventional Marciniak and Nakazima tests, but also in the presence of a severe strain gradient across the sheet thickness. Based on the results, formability in H240LA steel sheets increases with decreasing t0/R ratio. Fracture limit strains in both test series were evaluated by using an optical strain measurement system and measuring specimen thickness after fracture. (C) 2013 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：669 / 677
页数：9
相关论文
共 50 条
  • [31] Prediction of Fracture for High Strength Steel Sheets under Stretch Bending
    Naka, Tetsuo
    Kurose, Takanori
    Uemori, Takeshi
    Hino, Ryutaro
    Yoshida, Fusahito
    STEEL RESEARCH INTERNATIONAL, 2010, 81 (09) : 841 - 844
  • [32] Springback Analysis and Prediction of Automotive Steel Sheets Used in Compression Bending
    Spisak, Emil
    Majernikova, Janka
    Mulidran, Peter
    Hajduk, Julius
    Ruda, Frantisek
    MATERIALS, 2025, 18 (04)
  • [33] Prediction of the bending and out-of-plane loading effects on formability response of the steel sheets
    Peng, Deping
    Chen, Shun
    Darabi, Roya
    Ghabussi, Aria
    Habibi, Mostafa
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2021, 21 (02)
  • [34] Experimental investigation of stretch flangeability of high-strength steel sheets by means of in-plane stretch bending
    Hino, Ryutaro
    Kuzukawa, Tsuyoshi
    Yoshida, Fusahito
    INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017, 2017, 207 : 1934 - 1939
  • [35] INFLUENCE OF RETAINED AUSTENITE ON THE BENDING FORMABILITY OF STEEL SHEETS (STUDY OF THE STEEL SHEET CONTAINING RETAINED AUSTENITE - VIII).
    Sakuma, Yasuharu
    Matsumura, Osamu
    Takechi, Hiroshi
    Ishii, Yoshio
    Usuda, Matsuo
    Transactions of the Iron and Steel Institute of Japan, 1987, 28 (01)
  • [36] IMPROVEMENT OF BENDING FORMABILITY OF ULTRA HIGH-STRENGTH COLD-ROLLED STEEL SHEETS
    MIZUYAMA, Y
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (05): : S634 - S634
  • [37] Application of a “concave-side rule” approach for assessing formability of stretch-bent steel sheets
    D. Kitting
    M. Koplenig
    A. Ofenheimer
    H. Pauli
    E. T. Till
    International Journal of Material Forming, 2009, 2
  • [38] Development of TRlP-aided cold rolled steel sheets with the excellent stretch-flange formability
    Kashima, T
    Sugimoto, KI
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2004, 90 (08): : 49 - 55
  • [39] New hot-rolled high carbon steel sheets with excellent stretch-flange formability
    Fujita, T
    Kariya, N
    Nakamura, N
    Nakata, H
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2005, 91 (10): : 775 - 782
  • [40] APPLICATION OF A "CONCAVE-SIDE RULE" APPROACH FOR ASSESSING FORMABILITY OF STRETCH-BENT STEEL SHEETS
    Kitting, D.
    Koplenig, M.
    Ofenheimer, A.
    Pauli, H.
    Till, E. T.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2009, 2 : 427 - 430
12345