Formability of Automotive H240LA Steel Sheets in Stretch-Bending Processes

被引：6
|
作者：
Martinez-Palmeth, L. H. [1 ]
Martinez-Donaire, A. J. [1 ]
Centeno, G. [1 ]
Garcia-Lomas, F. J. [1 ]
Vallellano, C. [1 ]
机构：
[1] Univ Seville, Dept Mech & Mat Engn, Escuela Tecn Super Ingn, Seville 41092, Spain
来源：
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE, (MESIC 2013) | 2013年 / 63卷
关键词：
Sheet metal forming; H240LA; Stretch-Bending; Necking; Ductile Fracture; NECKING; LIMITS;
D O I：
10.1016/j.proeng.2013.08.205
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper discusses the influence of punch radius on the formability of 1.2 mm thick H240LA steel sheets. A series of Nakazima tests with hemispherical punch and stretch-bending tests with cylindrical punches of variable diameter were performed in order to assess the influence of the strain gradient on sheet failure. Necking limit strains were obtained by using a recently reported time-dependent methodology that can be used not only in conventional Marciniak and Nakazima tests, but also in the presence of a severe strain gradient across the sheet thickness. Based on the results, formability in H240LA steel sheets increases with decreasing t0/R ratio. Fracture limit strains in both test series were evaluated by using an optical strain measurement system and measuring specimen thickness after fracture. (C) 2013 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：669 / 677
页数：9
相关论文
共 50 条
  • [1] Experimental Study of the Formability of H240LA Steel Sheets Under Stretch-Bending Conditions
    Martinez-Palmeth, L. H.
    Martinez-Donaire, A. J.
    Vallellano, C.
    Centeno, G.
    Garcia-Lomas, F. J.
    SHEET METAL 2013, 2013, 549 : 349 - 355
  • [2] Experimental Characterization of Stretch-Bending Formability of AHSS Sheets
    Kitting, Daniela
    Ofenheimer, Aldo
    Pauli, Heinrich
    Till, Edwin T.
    14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS, 2011, 1353 : 1589 - 1594
  • [3] Formability limits of high-strength H240LA steel sheets under stress/strain gradients
    Martinez-Palmeth, L. H.
    Martinez-Donaire, A. J.
    Vallellano, C.
    MECHANICS OF MATERIALS, 2019, 132 : 47 - 56
  • [4] Cyclic stretch-bending: Mechanics, stability and formability
    Emmens, W. C.
    van den Boogaard, A. H.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, 211 (12) : 1965 - 1981
  • [5] A PHENOMENOLOGICAL CONCEPT TO PREDICT FORMABILITY IN STRETCH-BENDING FORMING OPERATIONS
    Kitting, D.
    Ofenheimer, A.
    Pauli, H.
    Till, E. T.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2010, 3 : 1163 - 1166
  • [6] A Phenomenological Concept to Predict Formability in Stretch-Bending Forming Operations
    D. Kitting
    A. Ofenheimer
    H. Pauli
    E. T. Till
    International Journal of Material Forming, 2010, 3 : 1163 - 1166
  • [7] Reduction of springback using simultaneous stretch-bending processes
    Hansjörg Schilp
    Joungsik Suh
    Hartmut Hoffmann
    International Journal of Material Forming, 2012, 5 : 175 - 180
  • [8] Reduction of springback using simultaneous stretch-bending processes
    Schilp, Hansjoerg
    Suh, Joungsik
    Hoffmann, Hartmut
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2012, 5 (02) : 175 - 180
  • [9] The stretch zone of automotive steel sheets
    L’ AMBRIŠKO
    L PEŠEK
    Sadhana, 2014, 39 : 525 - 530
  • [10] The stretch zone of automotive steel sheets
    Ambrisko, L'
    Pesek, L.
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2014, 39 (02): : 525 - 530
12345