Thermal Hydraulic Study of a Single Row Heat Exchanger With Helically Finned Tubes

被引:19
|
作者
Huisseune, H. [1 ]
T'Joen, C. [1 ]
Brodeoux, P. [1 ]
Debaets, S. [1 ]
De Paepe, M. [1 ]
机构
[1] Univ Ghent, Dept Flow Heat & Combust Mech, B-9000 Ghent, Belgium
来源
关键词
friction; heat exchangers; heat transfer; pipes; PRESSURE-DROP; FLOW; AIR; TURBULENT; PIPE;
D O I
10.1115/1.4000706
中图分类号
O414.1 [热力学];
学科分类号
摘要
In this study, the heat transfer and friction correlation of a single row heat exchanger with helically finned tubes are experimentally determined. The transversal tube pitch was parametrically varied. A detailed description of the test rig and the data reduction procedure is given. A thorough uncertainty analysis was performed to validate the results. The proposed heat transfer correlation can describe 95% of the data within +/- 11% and shows a 4.49% mean deviation. The friction correlation predicts 95% of the data within +/- 19% with a mean deviation of 6.84%. The new correlations show the same trend as most correlations from open literature, but none of the literature correlations are able to accurately predict the results of this study.
引用
收藏
页码:1 / 8
页数:8
相关论文
共 50 条
  • [41] Experimental study on single-phase heat transfer performance of internal helically finned tubes covering low Reynolds number in turbulent flow
    Wang, Yonghui
    Ma, Zhixian
    Zhang, Jili
    EXPERIMENTAL HEAT TRANSFER, 2024,
  • [42] A numerical study of the thermal and hydraulic parameters of a finned tube heat exchanger using shear-thinning fluid and rectangular winglet
    Kumar, Dheeraj
    Dalal, Amaresh
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2024, 195
  • [43] Experimental and Numerical Investigation of the Air Side Heat Transfer of a Finned Tubes Heat Exchanger
    Petrik, Mate
    Szepesi, Gabor
    PROCESSES, 2020, 8 (07)
  • [44] Enhancement of thermal and hydraulic performance of compact finned-tube heat exchanger using vortex generators (VGs): A parametric study
    Awais, Muhammad
    Bhuiyan, Arafat A.
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2019, 140 : 154 - 166
  • [45] LOCAL HEAT-TRANSFER BEHAVIOR AND ITS IMPACT ON A SINGLE-ROW, ANNULARLY FINNED TUBE HEAT-EXCHANGER
    HU, X
    JACOBI, AM
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1993, 115 (01): : 66 - 74
  • [46] Enhancement of Heat Dissipation from the Hydraulic System Using a Finned Adaptive Heat Exchanger
    Lipnicky, Marek
    Brodnianska, Zuzana
    APPLIED SCIENCES-BASEL, 2023, 13 (09):
  • [47] Condensation heat transfer characteristics of zeotropic refrigerant mixture R407C on single, three-row petal-shaped finned tubes and helically baffled condenser
    Zhang, Zhengguo
    Li, Qianxia
    Xu, Tao
    Fang, Xiaoming
    Gao, Xuenong
    APPLIED THERMAL ENGINEERING, 2012, 39 : 63 - 69
  • [48] Thermal Processes in Glazed Tubes of a Heat Exchanger
    N. Yu. Ibragimov
    Glass and Ceramics, 2023, 79 : 453 - 456
  • [49] Comparison of thermal and hydraulic performances of eccentric and concentric annular-fins of heat exchanger tubes
    Benmachiche, Abdelmoumene Hakim
    Tahrour, Farouk
    Aissaoui, Faris
    Aksas, Mounir
    Bougriou, Cherif
    HEAT AND MASS TRANSFER, 2017, 53 (08) : 2461 - 2471
  • [50] Correlating heat transfer and friction in helically-finned tubes using artificial neural networks
    Zdaniuk, Gregory J.
    Chamra, Louay M.
    Walters, D. Keith
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2007, 50 (23-24) : 4713 - 4723